540674
59
Zoom out
Zoom in
Previous page
1/67
Next page
Warning: Incorrect sizing of a seat post can result in slippage or failure, causing serious injury or death.
3. SEAT POST / SADDLE INSTALLATION
Note: Lightly grease saddle clamp bolt threads.
a. Place the saddle in the clamp and adjust to the desired angle.
b. The adjusting bolt on the bottom side of the head of the seat post requires a 6mm allen key. Recommended torque is 100
in-lbf (11.3N-m). Do not exceed maximum torque of 120 in-lbf (13.5N-m).
c. If the nose is tilted at an undesirable angle, loosen the 6mm allen bolt slightly and reset the angle of the seat. Once
desired seat angle is achieved, tighten 6mm allen bolt per torque specs.
4. SEAT POST HEIGHT ADJUSTMENT / TORQUE
Once the desired angle of the saddle has been adjusted, place the seat post at the required height for proper leg extension.
Using a 4mm allen head, tighten seat post clamp to recommended torque spec.
Recommended torque is 45 in-lbf (5.1 N-m). Do no exceed maximum torque of 55 in-lbf (6.2
N-m). Exceeding this limit can
result in damage to the seat post.
All Fuji carbon seat posts are marked with a minimum insertion line. This is the minimum amount of insertion required for the
seat post to remain structurally safe. Some frames will require additional insertion to ensure that the frame remains structurally
sound as well. The base of the seat post should be inserted enough into the seat tube to extend below the bottom
of the top
tube.
Warning: Fuji carbon seat posts are made to be lightweight, and are not suitable for all riders and all possible uses. If the
rider is approaching 250 pounds in weight, Fuji recommends against the use of this seat post. This seat post should be
nly for road riding and not mountain bike use. Failure to follow this warning may result in a catastrophic failure of the seat
post, causing serious personal injury or death.
used o
Warning: Seat post is NOT to be extended beyond the minimum insertion line. Extension beyond the minimum line can
result in failure, causing serious injury or death.
Warning: It may be visually difficult to identify damage to the composite material. If the external composite surface is
dented, frayed, gouged, deeply scratched, fractured,chipped or otherwise damaged, the component should be replaced. If
sea post has been involved in a crash or impact, even if there is no visible damage, Fuji or an authorized Fuji dealer should
inspect the product.
55
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuji Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuji Bike in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info