540674
27
Zoom out
Zoom in
Previous page
1/67
Next page
Adjusting the seat post cam action mechanism
The action of the cam squeezes the seat collar around the seat post to hold the seat post securely in place. The amount of
clamping force is controlled by the tension adjusting nut. Turning the tension adjusting nut clockwise while keeping the cam lever
from rotating increases clamping force; turning it counterclockwise while keeping the cam lever from rotating reduces clamping
force. Less than half a turn of the tension adjusting nut can make the difference between safe and unsafe clamping force.
WARNING: The full force of the cam action is needed to clamp the seat post securely. Holding the nut with one
hand and turning the lever like a wing nut with the other hand until everything is as tight as you can get it will not
clamp the seat post safely.
WARNING: If you can fully close the cam lever without wrapping your fingers around the seat post or a frame tube
for leverage, and the lever does not leave a clear imprint in the palm of your hand, the tension is insufficient.
Open the lever; turn the tension adjusting nut clockwise a quarter turn; then try again.
C. Brakes
There are three general types of bicycle brakes: rim brakes, which operate by squeezing the wheel rim between two brake
pads; disc brakes, which operate by squeezing a hub-mounted disc between two brake pads; and internal hub brakes. All three
can be operated by way of a handlebar mounted lever. On some models of bicycle, the internal hub brake is operated by pedaling
backwards. This is called a Coaster Brake and is described in Appendix C.
WARNING:
1. Riding with improperly adjusted brakes, worn brake pads, or wheels on which the rim wear mark is visible is
dangerous and can result in serious injury or death.
2. Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden
or excessive application of the front brake may pitch the rider over the handlebars, which may result in serious injury or
death.
3. Some bicycle brakes, such as disc brakes (fig. 11) and linear-pull brakes (fig. 12), are extremely powerful. Take extra
care in becoming familiar with these brakes and exercise particular care when using them.
4. Some bicycle brakes are equipped with a brake force modulator, a small, cylindrical device through which the brake
control cable runs and which is designed to provide a more progressive application of braking force. A modulator
makes the initial brake lever force more gentle, progressively increasing force until full force is achieved. If your bike is
equipped with a brake force modulator, take extra care in becoming familiar with its performance characteristics.
23
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuji Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuji Bike in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info