540674
26
Zoom out
Zoom in
Previous page
1/67
Next page
(5) On a single speed or an internal gear hub, replace the chain on the chainring; pull the wheel back in the dropouts so that
it is straight in the frame and the chain has about 1/4 inches of up-and-down play.
(6) With a cam action system, move the cam lever upwards and swing it into the CLOSED position (fig. 8 a & b). The lever
should now be parallel to the seat stay or chain stay and curved toward the wheel. To apply enough clamping force, you should
have to wrap your fingers around the fork blade for leverage, and the lever should leave a clear imprint in the palm of your hand.
(7) With a through-bolt or bolt-on system, tighten the fasteners to the torque specifications in Appendix D or the hub
manufacturers instructions.
NOTE: If, on a traditional cam action system, the lever cannot be pushed all the way to a position parallel to the seat stay or chain
stay, return the lever to the OPEN position. Then turn the tension adjusting nut counterclockwise one-quarter turn and try
tightening the lever again.
WARNING: Securely clamping the wheel with a cam action retention device takes considerable force. If you can
fully close the cam lever without wrapping your fingers around the seat stay or chain stay for leverage, the lever
does not leave a clear imprint in the palm of your hand, and the serrations on the wheel fastener do not emboss the
surfaces of the dropouts, the tension is insufficient. Open the lever; turn the tension adjusting nut clockwise a quarter
turn; then try again. See also the first WARNING in this Section, p. 18.
(8) If you disengaged the brake quick-release mechanism in 3. c. (2) above, re-engage it to restore correct brake pad-to-rim
clearance.
(9) Spin the wheel to make sure that it is centered in the frame and clears the brake pads; then squeeze the brake lever and
make sure that the brakes are operating correctly.
B. Seat post cam action clamp
Some bikes are equipped with a cam action seat post binder. The seat post cam action binder works exactly like the
traditional wheel cam action fastener (Section 4.A.2) While a cam action binder looks like a long bolt with a lever on one end and
a nut on the other, the binder uses an over-center cam action to firmly clamp the seat post (see fig. 8a).
WARNING: Riding with an improperly tightened seat post can allow the saddle to turn or move and cause you to
lose control and fall. Therefore:
1. Ask your dealer to help you make sure you know how to correctly clamp your seat post.
2. Understand and apply the correct technique for clamping your seat post.
3. Before you ride the bike, first check that the seat post is securely clamped.
22
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuji Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuji Bike in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info