725691
44
Zoom out
Zoom in
Previous page
1/92
Next page
41
ON /OFF button. This switches the airco on or off.
With this you select a particular function: cooling,
fanning or dehumidifying. Every time you press the
button, you change the function; the light on the control
panel shows which function is active. The fan is set
automatically.
With this, you set the desired room temperature in steps
of 1°C (from 17°C to 30°C). The control system can show
temperatures in °C and in °F. If the temperature is shown is
°F, then press both + and – buttons at the same time for
3 seconds and the temperature will show °C again.
The LED display shows the set temperature of the
cooling function. The room temperature is shown at
the dehumidifying and fanning functions. The LED
display also shows the following error and safety codes.
Error codes:
E0 EEPROM error
E1 Room temperature sensor error
E2 Humidier temperature sensor error
E3 Condenser temperature sensor error
E4 Screen communication error
EC Refrigerant leakage detection fault
Safety codes:
P1 Water reservoir is full: Connect the drain hose to
the bottom water drainage point and let the
collected water run off (also see the section on
water drainage). If this safety code recurs, contact
your supplier.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuave ACS09K01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuave ACS09K01 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info