505138
23
Zoom out
Zoom in
Previous page
1/39
Next page
PAG.
23
rev 1.1
4.4. SINGLE SEARCH
When you enter the “Single Satellite Search” menu you can see
a window like OSD 30:
You can edit the following items:
1. Satellite: Press [ ] to switch Satellites or press [OK] to
enter satellite list to select directly.
2. In the “FTA Only” item, press [
to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
3. In “Scan Channel” item, press [ ] to select to scan TV
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as “No”, the receiver
will search the selected Satellite. In case you select “Yes”, the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In “Scan Mode” item you can select “Auto Scan” to blind
scan or “Preset Scan” to scan all preset transponders.
6. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 31).
4.5. MULTI SEARCH
Entering in this menu, you can make a search in all the
satellites of the list confi gured in the “Satellites list” option. The
confi guration options are the same as in the individual search
section.
After selecting Antenna Setup another window will be opened
(OSD 32).
You can edit the following items:
1. Satellite: Press [OK] to enter satellite list.
2. In the “FTA Only” item, press [ to select to scan only
free channels or even scrambled channels. If you select “Yes” it
will scan free channels only.
3. In “Scan Channel” item, press [ ] to select to scan TV
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as “No”, the receiver
will search the selected Satellite. In case you select “Yes”, the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In “Scan Mode” item you can select “Auto Scan” to blind
scan or “Preset Scan” to scan all preset transponders.
6. Move the highlight to “Search” and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 33).
INSTALLATION
OSD 31
OSD 32
OSD 34
OSD 33
ENGLISH
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX S400 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX S400 HD in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal MAX S400 HD

FTE Maximal MAX S400 HD User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info