505138
22
Zoom out
Zoom in
Previous page
1/39
Next page
PAG.
22
rev 1.1
4.3. ANTENNA SETUP
Depending on how the “Antenna Connexion” section is
confi gured, it will allow confi guring different parameters:
(Fixed Antenna)
(OSD 28):
- Satellite: Press [ ] to switch Satellites or press [OK] to
enter satellite list to select directly.
- LNB frequency: Use [
] in order to change among
“Universal”, a specifi c “Polarity and Band”, “Unicable” or a
specifi c frequency of the local oscillator.
Note: If you have an Unicable installation that allows you to
distribute a satellite signal through a unique cable up to 8
receivers as maximum, in this menu option you can confi gure
the receiver. If you select “Unicable”, press the [green] button
to select a center frequency to the receiver and press the [red
button to choose the frequency of a channel.
- On “Transponder” item use [ ] to select the desired
transponder.
- DiSEqC1.0: Use [ ] to switch the options of DiSEqC
switches.
- DiSEqC1.1: Use [ ] to switch the options of DiSEqC1.1
switches.
- 22K: Use [ ] to switch “ON” and “Off”. The 22 kHz sig-
nal is used in KU Universal LNBs to change between low
band and high band. After choosing LNB type “Universal”
you cannot modify 22K.
- Toneburst (0/12V): Press [ ] to switch this function
“On” or “Off”.
- Polarity: Press [ ] to switch between “Auto / H / V”.
(Motorized Antenna)
(OSD 29):
- LNB type: Use [ ] in order to change among “Universal”
, “Unicable” or a specifi c frequency of the local oscillator.
Note: If you have an Unicable installation that allows you to
distribute a satellite signal through a unique cable up to 8
receivers as maximum, in this menu option you can confi gure
the receiver. If you select “Unicable”, press the [green] button
to select a center frequency to the receiver and press the [red
button to choose the frequency of a channel.
- Motor Type: Press [ ] to select between DiSEqC1.2 and
USALS”.
- Local Longitude: Geographic length of your position
(USALS).
- Local Latitude: Geographic latitude of your position
(USALS).
- Delete all: Deletes all the satellite positions saved.
- Motor Setting: It allows confi guring all the engine positions.
- Limit Setup: It allows confi guring the East and West position
of the engine.
Press [Exit] to save the changes.
OSD 28
OSD 29
OSD 30
INSTALLATION
ENGLISH
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal MAX S400 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal MAX S400 HD in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal MAX S400 HD

FTE Maximal MAX S400 HD User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info