505111

FTE Maximal I-PVR ST192 CI HDMI Manual

13
Zoom out
Zoom in
Previous page
1/43
Next page
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 1 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Table of contents
0.
Control elements and connections.......................................................................................................................3
0.1. Receiver front panel ......................................................................................................................................3
0.2. VFD-Display....................................................................................................................................................3
0.3. Receiver back panel ......................................................................................................................................4
0.4. Remote control ..............................................................................................................................................5
1. First installation......................................................................................................................................................6
1.1. Complete Content..........................................................................................................................................6
1.2. Accessories and installation examples .......................................................................................................7
1.3. Safety rules ....................................................................................................................................................8
1.4. Fast installation guide...................................................................................................................................9
1.5. Menu overview.............................................................................................................................................15
2. Standard functions...............................................................................................................................................16
2.1. Switch on the receiver.................................................................................................................................16
2.2. StandBy........................................................................................................................................................16
2.3. Teletext.........................................................................................................................................................16
2.4. MUTE ............................................................................................................................................................16
2.5. Numeric block on remote control...............................................................................................................16
2.6. Switch channels...........................................................................................................................................16
2.7. Change between TV- and Radio channels.................................................................................................16
2.8. Vol+/Vol- Volume ........................................................................................................................................16
2.9. Stop the functions .......................................................................................................................................16
2.10. Open Main menu..........................................................................................................................................16
2.11. Watch the last viewed channel...................................................................................................................17
2.12. Channel list ..................................................................................................................................................17
2.13. EPG Electronic Program Guide..................................................................................................................17
2.14. Favourite channel list..................................................................................................................................18
2.15. Menu Audio..................................................................................................................................................18
2.16. Signal and Channel information.................................................................................................................18
2.17. Changing favourite channels......................................................................................................................18
2.18. Zoom Function.............................................................................................................................................18
2.19. Subtitles .......................................................................................................................................................18
2.20. Direct buttons in the streaming function...................................................................................................18
2.21. Short-circuit protection...............................................................................................................................19
2.22. Fast record...................................................................................................................................................19
2.23. Time Shift .....................................................................................................................................................19
3. Channel management..........................................................................................................................................20
3.1. TV-Channel list.............................................................................................................................................20
3.1.1. Skip channels......................................................................................................................................20
3.1.2. Lock channels .....................................................................................................................................20
3.1.3. Delete channels...................................................................................................................................21
3.1.4. Delete channel groups or all channels..............................................................................................21
3.1.5. Edit channels.......................................................................................................................................21
3.1.6. List of favourite channels...................................................................................................................21
4. PVR Management.................................................................................................................................................22
4.1. Play record...................................................................................................................................................22
4.2. Lock record..................................................................................................................................................22
4.3. Delete record................................................................................................................................................22
4.4. Movies, MP3, Photos...................................................................................................................................22
4.5. Sorting..........................................................................................................................................................23
4.6. HDD Management........................................................................................................................................23
4.6.1. Folder management ............................................................................................................................23
4.6.2. Delete folder ........................................................................................................................................23
4.6.3. Lock folder...........................................................................................................................................23
4.6.4. Add folder............................................................................................................................................24
4.6.5. Move file...............................................................................................................................................24
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 2 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
5.
Timers ...................................................................................................................................................................25
5.1. Sorting..........................................................................................................................................................25
5.2. Delete Timer.................................................................................................................................................25
5.3. Edit / Add timer ...........................................................................................................................................25
6. Tools .....................................................................................................................................................................27
6.1. Calculator.....................................................................................................................................................27
6.2. Calendar .......................................................................................................................................................27
7. CAS Configuration (Conditional Access System) .............................................................................................28
8. System Settings ...................................................................................................................................................29
8.1. Menu Language ...........................................................................................................................................29
8.2. Audio Language...........................................................................................................................................29
8.3. Time Zone.....................................................................................................................................................29
8.4. TV Settings...................................................................................................................................................30
8.5. Recording Settings......................................................................................................................................31
8.6. OSD Settings................................................................................................................................................31
8.7. Geographical location.................................................................................................................................32
8.8. Version .........................................................................................................................................................32
8.9. Factory Default.............................................................................................................................................32
8.10. Software Upgrade........................................................................................................................................32
9. Parental Control ...................................................................................................................................................34
9.1. Set Lock........................................................................................................................................................34
9.2. Channel lock ................................................................................................................................................34
9.3. Record Lock.................................................................................................................................................34
9.4. Installation Lock ..........................................................................................................................................34
9.5. Change Password........................................................................................................................................34
10. Installation............................................................................................................................................................35
10.1. Antenna configuration: ...............................................................................................................................35
10.2. Channel Search: Satellite............................................................................................................................36
10.3. Satellite Management..................................................................................................................................37
10.4. Transponders Management........................................................................................................................37
10.5. Antenna power.............................................................................................................................................38
10.6. Channel Search: Terrestrial........................................................................................................................38
10.7. MUX Management........................................................................................................................................39
10.8. Channel Search: IP......................................................................................................................................39
10.9. Network Configuration ................................................................................................................................40
10.10. Streaming Configuration.........................................................................................................................40
10.11. Network Management..............................................................................................................................41
10.12. SatcoDX Update.......................................................................................................................................41
10.13. Backup .....................................................................................................................................................41
11. The equipment of the receiver ............................................................................................................................42
11.1. Technical data..............................................................................................................................................42
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 3 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
0. Control elements and connections
0.1. Receiver front panel
1 2 3 4 5 6
1 POWER: Switches the receiver ON or in Standby mode. For total switching off,
use the main switch at the back side of the receiver.
2 VFD-DISPLAY: Shows information like channel name and receiver functions
3 STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON)
4 IR-SENSOR: Reception sensor for the IR remote control signals
5 FRONT COVER: Opening the front cover, you will access to the Conditional Access system
and to the USB connector.
6 BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
0.2. VFD-Display
1 2 3 4 5 6 7 8 9
10
11 12 13 14 15 16 17 18 19 20 21 22 23 24
1
Without function currently
13 Channel is locked by password
2 USB-device is connected 14 Tuner 1 signal OK
3 Channel have EPG- information 15 Tuner 2 signal OK
4 Subtitle available 16 Without function currently
5 Channel have TXT information 17
Without function currently
6 Audio signal in AC3 available 18 Time shifting is working
7
Without function currently
19 Record is playing
8
Without function currently
20 Record will be moved backward
9 Receiver records one channel 21 Record will be moved forward
10 Alpha numeric display 22 Sleep mode is active
11 Bar to show adjusted volume 23
Without function currently
12 Channel is coded 24
Without function currently
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 4 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
0.3. Receiver back panel
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15
1 POWER ON/OFF: Main switch to switch off totally the receiver.
2 AC IN: Power cord 230VAC/50Hz.
3 IF IN: Satellite input.
4 ANTENNA IN: Terrestrial input of the digital tuner.
5 ANT IN: Input of the modulator.
6 ETHERNET: Network connection of the receiver.
7 RS-232: Serial port to update the firmware of the receiver.
8 OPTICAL S/PDIF: Optical output for digital audio (AC3)
9 HDMI: Video & Audio Output to connect the TV.
10 IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited
channel selection.
11 LOOP OUT: Terrestrial output for cascading to others devices.
12 TO TV: Modulator output to connect one TV set. Audio signal is available in Mono.
13 TV SCART: SCART output for connecting one TV set
14 VCR SCART: SCART connector for video recorder, DVD recorder or DVD player.
15 COAXIAL S/PDIF: Coaxial output for digital audio (AC3)
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 5 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
0.4. Remote control
1. POWER: Switches receiver ON or in stand-by-mode.
2. 3-set LED: Shines as function control,
showing the selected transmission code 1, 2 or 3
3. TV/R: Switches between TV and Radio channels.
4. CODE: Changes transmission code of the remote control.
5. MUTE: Switches audio on and off.
6. NUMERIC KEYS: For direct typing values and names.
7. INFO: Shows channel information with signal bar.
8. : Starts Picture In Picture function.
9. VOL+ VOL-: Adjusts audio volume up and down.
10. CH+ CH-: Changes channel up and down.
11. Back: Watch the last viewed channel.
12. EXIT: Exit menus or stop operations.
13. EPG: Shows the EPG information.
14. MENU: Opens the main menu.
15. : Confirms selections or opens channel list.
16. : Adjusts audio volume or controls the cursor in menus.
17. : Changes channels volume or controls the
cursor in menus.
18. : Quick start for recording.
19. : Opens PVR menu.
20. : Start / Stop button for recording and TimeShift.
21. : Stop button for recording and TimeShift.
22. : Backward button for recording and TimeShift.
23. : Forward button for recording and TimeShift.
24. : Places marks within recording process.
25. List: Opens channel list.
26. Audio: Opens audio menu.
27. Fav: Opens favourite channel list.
28. App: Without function currently.
29. Sub: Switches subtitle on and off.
30. TEXT: Opens and closes teletext.
31. Pup Pdw: Moves cursor in block steps
32. Zoom: Zoom function.
33. Fav+ Fav-: Moves favourite channel up and down.
34. Color Ke ys: Controls menu options.
35. Green Button: Start sending video streaming.
36. Red Button: Stop sending video streaming.
►II
◄◄
►►
■
PVR
MARK
REC
PIP
OK
Back: Battery box
1 2
7 8
9 10
11
12
22
16
21
24
18
13 14
15
19
23 20
17 17
6
3
4
5
16
25 26 27
28 29
30 31 32 33
34
35
36
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 6 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
1. First installation
1.1. Complete Content
The following goods must be included in this package when you open it for the first time.
Remote Control Installation Guide Two batteries CD-Rom
Type AAA, Micro, 1,5V
IEC Bridge cable
IEC connection cable
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 7 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
DiGimax
1.2. Accessories and installation examples
DIGIMAX Active DVB-T- outdoor antenna Code: 9002029
LOG 3235 F VHF-UHF DVB-T- outdoor antenna Code: 0203235
DVB-T Antenna Active DVB-T- indoor antenna Code: 9002024
PR 80 AB Offset Dish 80cmØ Code: 0798021
LNC 54 U LNC universal single Code: 0400065
UMS 125 DiSEqC Switch Code: 0702218
LG 229 DVB-T Mast Amplifier Code: 9000329
MF 103 Mixer Terr-SAT Code: 9000104
LPS 1222 Power Supply Code: 9901222
AO 90S 3 connectors outlet Code: 0500094
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 8 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
1.3. Safety rules
Please read the manual carefully before using the receiver.
You will receive a lot of information to use this product correctly and you will prevent incidents.
Please keep the manual on a safe place.
This sign warns you about
high voltages, with risk
of electric shock
Caution: Do not open the housing of
this receiver. Repairs can only be
made by professionals authorized by
Fte maximal. If not, warranty will not be
valid anymore.
This sign informs about
special information which is
important to know.
Caution: Keep this receiver far away from liquids. Do not place it on placements close to water like flowers
vases, wash basin, aquariums or pools. It exists a high risk of electric shock when water or high humidity
filters inside the receivers. Never place other devices on it; they can overheat the receiver as well as daring
fire risk. The receiver must be used only with original power cord to 230V main plug.
Please read carefully this manual and do not hesitate to contact to professional help if you have any doubt.
Opening the receiver housing as well as the Hard Disk case will mean a total lost of warranty.
Installation:
1. Never work during a thunderstorm or staying near of the antenna systems.
2. Before adjusting the receiver, make sure that your antenna is well aligned and works properly.
3. Unplug the main connection (230V) every time you work with receiver connections. Do it also when you stay
away for a long time out of home like in holiday periods.
4. The best placement for the receiver is close to the TV and your other equipment like DVD, VCR, CD, and game
stations. Select a stable place where you can make the necessary connections in a safety way.
The 230V main plug should be in a place easy to reach, that you can unplug it when it is necessary.
Cleaning: Before cleaning the receiver with a slightly damped cloth, please disconnect the main 230 V connection from
the receiver. Please use only mild cleaners.
Accessories: Please, do not use accessories which are not agreed by the manufacturer of the receiver.
Unsuitable accessories could increase the risk of getting on fire, an electrical impact or other damages.
Placement: Select a placement where the Receiver has air circulation enough, otherwise it may have overheating
accumulation. Do not cover the openings of the housing. Unsuitable placements are also places close to heaters or soft
locations like e.g. sofas and beds.
Power connection: Select a main plug with easy access, in case of unplugging necessity; it will be easier and faster.
Please, make sure that the cord as well as the plug is in perfect conditions. Do not pull the cable, use always the plug.
Housing: Please, make sure that no liquid will filter into the housing of the receiver. If so, disconnect immediately the
receiver from the main 230 V plug and bring the receiver to a professional.
Air humidity: When you take the Receiver from a cold to a warm place, please wait until the receiver gets the same
temperature as the new environment, in order to avoid problems of humidity condensation.
Maintenance / Repairing: Within the warranty time all the repairing processes should be done by Fte Maximal technical
staff. Otherwise, the warranty will be lost.
RISK OF ELEKTRIC SHOCK
DO NOT OPEN
CAUTIONR
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 9 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
1.4. Fast installation guide
Please, follow the instructions for a faster and simpler installation of the receiver.
Step 1: Connections
Connect the ETHERNET input of the receiver to the network.
Connect the cable from the LNB and Dish:
Connect the cable with the Satellite signal to the IF IN input of the receiver.
Connect the cable of the terrestrial antenna:
Connect the cable with the Terrestrial signal to the ANTENNA IN connector.
Connecting TV set, LCD or video beamer:
You can connect in different ways your TV set or other display system:
Scart This is the connector which will be normally used to connect the TV.
For this purpose, you will need a Scart – Scart connector.
HDMI Connector Connect this output to the TV to get the Video & Audi signals.
Modulator The modulator output gives the lowest picture quality. You only will need this output if
your TV set only have IEC input. You can use the IEC connection cable that is included.
On the receiver, you have to use the connector TO TV.
Please note that with the modulator, you only will have available mono audio signal.
Output LOOP OUT You can connect this output to the antenna input of your TV or VCR to receive the
analogue terrestrial signal.
Recorder / DVD At the VCR - Scart connector, you can connect a Video or DVD-Recorder.
Also the signal coming from a DVD player is possible to be watched if your TV set has
Scart connections.
You will find further information at chapter TV Settings.
You can obtain further information in chapter Receiver back panel.
This receiver has a main switch at the back panel of the receiver.
If a message “short-circuit” in shown, you have a short-circuit in your antenna system.
Please check it and restart the receiver.
When you set up the system for the first time, the current date will be stored in Menu > System Settings > Version
as beginning date for the warranty period.
Step 2: Main settings on receiver
When you start the first time the receiver or when you execute a “factory default” process, you will see this
installation guide in English language.
The selection of the menu options will be done with the arrow buttons
, and the button
OK of the remote control.
Please, choose the code for your remote control in the first window.
Fte Maximal gives you the possibility of using a IP, a DVB-T and a DVB-S
receivers at the same time.
For this purpose, your new receiver is selected by factory with code 1.
Please press now the button Code on your remote control until the LED 1 is
lighting.
You have to select the same position in the receiver than in the remote control.
If you have problems with remote control devices, you can change the
transmission code if you go to Menu > System Settings > OSD Settings after
finishing the quick installation guide.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 10 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Menu Language:
Here you have to select the language for the Receiver menu and information.
Select the language with the arrow buttons
and press the OK
button.
Time Zone:
In order to the receiver is able to display the correct time and adjust the timer
recordings correctly, it is needed to fix the time zone to the place you live.
Select here the time delay according to your position comparing to
Greenwich Time.
In UK: Summer time: +1 hours
Winter time: GMT hour
Select with the arrow buttons
and press the OK button.
Selection of the satellite list of channels pre-loaded
This option allows loading the channel list stored in your receiver, and you
will not need to tune channels. The list includes Astra / Hot Bird / Hispasat
/ Turksat channels, and it is supposed that the same input signal is
available in both inputs.
If you select Load Channel List, the installation assistant finishes at this
point and it begins the viewing of the channels.
In case of having a different configuration, please select Tune new
channels and continue with the installation assistant, configuring the antennas.
Antenna configuration:
In this menu, you should configure the connected signals in the IF IN of
your receiver.
By default, the equipment comes with the configuration that you can see in
the Picture, with four satellites.
The available options in this screen allow:
Red Button: Deletes the selected satellite. It asks for confirmation.
Green Button: Edits the selected satellite. The options appear at the image
below.
Yellow Button: Adds a satellite. The options appear at the below image.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 11 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Antenna Options:
− Name: Your receiver disposes of several pre-configured satellites. You
can find the one you want in the list or add a new one. They are sorted
by its orbital position.
− Band: There are two available bands: C and Ku. The differences
basically are the frequencies in the transmission. The Ku band has two
possibilities; the most common is the Universal Ku.
− Low Band / High Band: It is used when the band selection is the Ku, and
it programmes the local oscillators of the LNC.
− DiSEqC 1.0 / 1.1 Port: To configure the use of switches.
− Motor: Activates the motor option to direct the antenna.
− 22 KHz: tone of switching the band of the LNC.
− LNB Power: LNB Feeding. By default the selection is for an Universal
LNB.
− Signal: It shows if there is available signal in this selected configuration.
Alter whatever change, it should be confirmed with the OK key when you exit the menu.
Channel Search: Satellite
Once the antenna configuration is completed, you should proceed to tune
the satellite channels that you have selected. There are different ways to
tune the channels: through LNB, through Satellites and through
Transponders.
When you select the channel searching through LNB, you only can select
one LNB, which corresponds to the programmed tuner.
When you are searching by satellites, you are allowed to select a Wide range
of satellites, so you could programme the searching of all the satellites that
you have configured.
The searching through Transponder is the most selective. It allows selecting all the frequencies that you’re
going to tune and searching channels.
In whatever selection, you always will have available to search Free To Air channels (uncoded channels),
channels with Conditional Access or All the channels.
Please, choose the searching pressing the Green button. Once you have finished (the time will depend on
the number of transponders it will have to find) you will get a window like the following one:
Detected TV Detected
Channels Radio Channels
Level and Quality
Searching process
Meter
You can select the channel searching whenever pressing the Exit button.
Once the searching is finished, you must confirm the storing of a new Channel List. Press the OK button.
The receiver will come back to the Channel Search menu.
You can search again if you want, or exit by pressing the Exit button.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 12 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Channel Searching: Terrestrial:
This receiver has no pre programmed channel list, because DVB-T
configuration changes in every different area.
Start the channel searching process by pressing the Green Button.
The receiver searches now in all TV frequencies.
You may stop searching by pressing the button Exit .
Once the search is finished, you must confirm if the new found channels have to be stored.
Press for confirm the OK-button.
Now you come back to menu Channel Search.
You can start a new search again, or you can close the menu now with the button Exit .
Network Configuration
The receiver will require the introduction of the needed parameters to be
able to get connected to a network, as well as to be visible to other
equipments so that receive streaming of video and audio.
You should introduce the following parameters:
IP Address Number of 32 bits expressed in 4 numbers
between 0 and 255 which identifies the receiver
inside its network.
Every device in the network should have a
different IP Address and it is highly recommended
that all of them are in the same subnetwork and
with IP addresses into the following range:
10.x.x.x
172.16.0.0 – 172.31.255.255
192.168.x.x
Subnet Mask Number in IP format that, combined with the IP address, identifies where the equipment is.
Search status
Current channel
Radio Channels
detected
Channels which the receiver
has found, currently 11
Signal Power and Quality
meter related to the selected
frequency
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 13 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
IP LAN Soft: IP address of the PC where the application for exchanging video streamings between the
PC and the receiver is installed.
If you want, you can download the application IP LAN Soft from the Website:
www.ftemaximal.com
MAC Device address at hardware level. It is unique in each device and it comes from the factory.
You can move through the menus with the buttons
and .
With the Red button you delete the last character.
Press OK to save the changes.
Streaming Configuration
This receiver can send streaming to other equipment connected to the
network.
You can send video streamings in Unicast and Multicast modes.
- Unicast is when the information is sent from a unique sender to a
unique receiver.
- Multicast in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
This receiver can only send terrestrial channels streams
In this window you can configure the network parameters of the device at destination:
Streaming You should select On so that the receiver sends the streaming.
Address IP Address of the destination device.
You can simultaneously send the streaming to different devices in case that in this
field a multicast IP address is introduced.
Destination port Communications port where the information is sent.
The port must be a pair number into the range between 1024 – 65534.
Streaming protocol You can select the communications protocol. Options: UDP or RTP.
Current Channel It allow you to fix the number of transponder that is going to be sent to the destination receiver.
No: Always will be sent to the receiver at destination the indicated cannel in the field Channel,
and the origin receiver only will be able to see any cannel belonging to the same transponder
which is indicated in the Channel field, or IP channels.
When you see an IP channel, the streaming sending process will stop.
Yes: the receiver will send the channel which is tuned locally. Every time you
change the channel in the receiver, you must tune the same in the destination
receiver.
Channel: Service to be sent. Only available when you select No in the field Current Channel.
You can move through the menu with the buttons
and .
With the Red button you delete the last character.
Press OK to save the changes.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 14 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Search IP Channels
The receiver will carry out a search for channels broadcasted by other
equipment connected to the network.
You can receive transmissions of other equipment in mode Unicast and
Multicast.
- Unicast is when the information is sent from a unique sender to a
unique receiver.
- Multicast in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
In Search Type select Auto to search for all the channels which are
broadcasted by other equipment in your network in multicast mode. If you
select the Host option, it will look for transmissions of the equipment present
in the list Network Management that you select.
In the field Multiplex you should select the hosts from the list Network
Management in which you with to search for channels.
Pressing the Blue button or
a new window will appear, where you can
select the hosts.
You can move the cursor with
.
With the Green button you select the hosts.
Press Exit to go back to the search menu.
If you press the Green button, it will carry out a search of the video IP
channels.
Press Exit to exit.
The Fast install guide is now finished.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 15 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
1.5. Menu overview
Main menu
Channel Management
System Settings
Move, rename or delete channels,
Program and, create favourite list.
Main settings for receiver
for OSD and adapt TV set
Factory default
Software upgrade
PVR - Management
Tools Parental Control
Administration for recordings,
Pictures and MP3 files as well as
connecting external USB devices
Calculator,
Calendar with date management
Activate parental control
Timers
CAS Management Installation
Manual activation for timer events
Conditional access system
information.
Receiver and antenna settings
Network adjustments
Search channels
Backup
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 16 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
2. Standard functions
2.1. Switch on the receiver
The receiver has a main switch at the back panel. To switch on, take the switch in position 1.
Now the receiver begins to run and show information on its display.
2.2. StandBy
To switch the receiver from Standby (sleep mode) to the working mode, press Orange Power button on the left corner
at the top of the remote control.
If the receiver had been working before and you did not switch on by main switch, the receiver show the last displayed
channel.
When you press it again, the receiver goes back to the stand by mode.
2.3. Teletext
The button Text opens the teletext generator.
Automatically the receiver loads page 100 as standard.
Like in your TV set you can open the pages by pressing the buttons 0-9.
If you want to open, for example, the page 140, you
have to press the buttons 1 – 4 – 0.
When you want close the page, press Exit.
2.4. MUTE
With this function, you will be able to shut down the audio completely.
To do it, press the button Mute and the warning symbol will be displayed.
By pressing again the button Mute the function will be disabled.
2.5. Numeric block on remote control
Over the numeric block in the remote control, you can select directly channels the when you know the stored program
place. If you want for example place 23, you have to press the buttons 2 and 3 and after the button OK .
2.6. Switch channels
With the buttons CH+ / CH- or
you can change the channels also.
Press one button for getting one channel up or down.
2.7. Change between TV- and Radio channels
When you want change between TV and Radio channels, you have to press the button TV/R on the remote control.
2.8. Vol+/Vol- Volume
With the buttons Vol+ / Vol- or
you can regulate the audio volume.
To do it, you will see a graphic like the one at the left side.
For using this function properly, you need to make an alignment with you TV set.
Turn off the volume of the receiver. For this, press the button MUTE on remote control. Now turn up the volume on TV
until the moment you hear a noise. Now turn down the volume until the noise desapears. Normally this is around 50-
75% of the total volume of the TV set.
2.9. Stop the functions
With the button Exit you can stop functions like channels search or close menus.
2.10. Open Main menu
To open the main menu, you have to press the button MENU.
The menu system is made in a tree structure
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 17 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
2.11. Watch the last viewed channel
With the Back button, you can access to the channel viewed previously.
2.12. Channel list
When all the menus are closed, you can open a channel list by pressing the
button OK.
With the button TV/R you can switch between TV and Radio channels.
With the button FAV you can sort this list as follows:
POS, Position in channel list
Name, by alphabetic sort
FTA / CAS sort by free or coded channels
If the position or the name of the channel fits, you can carry out a searching.
Press the Green button to select the searching mode until the symbol (…)
appears in the row Pos or Name, and introduce the characters with the
alphanumeric keyboard.
The handling of the keyboard is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
You will get a channel list with the information requested.
With the EPG button, you can filter the channels shown in the list.
A window will appear where all the inputs of your receiver are shown.
You can select only the channels of one concrete satellite, the IP channels, the
terrestrial channels or all the channels.
In this window, if you press List you will change the sort of the list (by name, or
by angle).
2.13. EPG Electronic Program Guide
By pressing the button EPG you will start the electronic program guide.
The receiver gets the information of the tuned channel. The information
only will be available in case that the streaming contains it or the broadcaster
transmits it.
With the buttons
you can select a channel and with one
event. The Blue colour field highlights the current selected event and the
Red line shows the current time.
With the Yellow button you can mark one event. The receiver will switch to
this channel once the event has begun. If you select an event which has
already started, the receiver switches to this channel immediately.
Using the REC button (over and event) the receiver will record this event
into the external hard disk.
Pressing the button INFO you will get more detailed information about the event.
With the arrow buttons
you can move along the text.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 18 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
2.14. Favourite channel list
If no menu is opened, you can get your favourite channels list by pressing the
button FAV.
With the buttons Pup / Pdw you can switch between 8 different lists, if you have
marked channels before.
With the buttons
you can select a channel from this list.
2.15. Menu Audio
If all menus are closed you can open the menu Audio by pressing the button
Audio.
You can change here the audio output in Stereo, Left and Right audio format.
Testing the channels, you will be able to make the most suitable selection.
Standard selection is Stereo.
2.16. Signal and Channel information
Pressing the INFO button, with no menu activated,
You will see the channel information and the Signal Level Bar. This
information is the same that appears when you change the channels.
In the signal bar we can see the following information:
Channel Number, Channel Name, current Time and Date, Name of the
current event and brief description given by EPG.
Start and Stop time of the event and the indication of the current time
from the beginning in yellow colour.
This menu disposes of 2 keys of advanced functions. Blue and Yellow
keys. Through Blue key, you can get the technical information of the
shown channel at the top part of the window, as you can see in the
image:
Yellow key allows seeing which will be the next event indicated by EPG, with its start and stop times.
2.17. Changing favourite channels
With the buttons FAV+ and FAV- you can switch the favourite channels directly.
The Sequence for the channels is the established one before in main channel list.
2.18. Zoom Function
With the Zoom button you can see more details of the image.
By pressing the button OK you can select the enlargement.
If you want to stop, please press Exit.
2.19. Subtitles
When no menu is opened, you can start with Sub button the subtitle function.
Subtitles only can be displayed when the operator transmit them.
2.20. Direct buttons in the streaming function
Pressing the Green button out of the menus, it automatically start sending the video streaming that you have configured
in the menu Streaming Configuration.
With the Red button, it stops sending.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 19 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
2.21. Short-circuit protection
If you see one message like this, you have a short circuit or to high powerin the
antenna system.
In this case switch off the receiver and check the system.
The displayed information stops automatically when the problem is solved.
2.22. Fast record
If you want to record one event immediately you must press only
the button REC on the remote control. You will see the event as usually
and you will see a red point for a while in screen.
If you press REC more that one time, you can select how long the
record will be.
Selection: 30min, 60min, 90min, 120min, 180min, 240min
If you press only one time the record time will be according your
selection, which will be done in:
Menu > System Settings > Recording settings
2.23. Time Shift
If you want to use time shift function to stop one event, you only need to
press only the button ►II one remote control.
The program stops and it will be stored on the hard disk until you restart to
watch it. The OSD shows you the information about the time delay from the
original event.
When you want continue you only press again ►II.
As the information you see now comes from the hard disk, you can also
use forward and backward functions.
If you press several times ►► you can adjust the speed for forward.
Selection: 2x, 4x, 8x speed.
You also have the option 5m, in this case the receiver moves in 5 minutes steps.
Through INFO Key, you can see the time difference between you playback and the realtime, in an horizontal bar which
appears in the top part of the picture.
The maximum time that the equipment allows recording meanwhile it is paused is for 4 hours.
The red bar is the recorded time, the yellow bar is the played time, the rest of time is the time in Time Shifting mode.
When you exit of the Time Shifting mode, the receiver will give you the
option of storing the Time Shifting in the Hard Disk like a recording.
Press OK to save the recording.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 20 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
3. Channel management
3.1. TV-Channel list
Here you will find an overview about all channels.
Channels can be administrated, moved, deleted or blocked.
The navigation is with the buttons
and .
With the button TV/R you will switch between TV and Radio
channels.
With the button LIST you can sort this list as follows:
POS, Position in channel list
Name, alphabetically
FTA / CAS sort by free or coded channels
To see the PID information, you have to press the button TEXT.
This information will be read by the receiver automatically and it gives
the information where the program is in the data stream.
It is not necessary to change it, but it can be done by the numeric keys
of the remote control.
With the EPG button, you can filter the channels shown in the list.
A window will appear where all the inputs of your receiver are shown.
You can select only the channels of one concrete satellite, the IP channels, the
terrestrial channels or all the channels.
In this window, if you press List you will change the sort of the list (by name, or
by angle).
3.1.1. Skip channels
With this function it is possible to skip selected
with the buttons CH+ / CH- or
.
If you want mark channels for skipping, you have to select the channel and then press
the Blue Button Skip. Doing this, you will see that the channel has a symbol
like the one at the right side. Marked channels only will be opened by channel list.
3.1.2. Lock channels
If you want to lock channels with a password needed for opening them,
you can do it with this function.
If you want to mark channels, please select the channel by
buttons and than press the Yellow button Lock.
Doing this, you will see that the channel now has a symbol like the one at the right side.
In order the function works properly, you have to activate the password
function in menu Parental Control.
±
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 21 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
3.1.3. Delete channels
If you want to delete one channel, you have to select it and then press the
Red button Delete.
Doing this, you see now one symbol like one the right side.
You can mark more than one channel, the channels will be deleted when you close the
Channel Management.
3.1.4. Delete channel groups or all channels
If you want to delete a channel group or all channels,
you have to select them and than press the Green button Del. Group.
In the following submenu you should choose all channels from one Host,
MUX or All channels.
With the OK button the selection will be done.
3.1.5. Edit channels
If you want to move channels in their position in channel list
or you want to change their name, you can do it in the submenu
Edit Channel.
To do it, press the button INFO.
In the line POS you can change the placement in channel list
In Operation, you can select the mode of changing the position of the
channel. You can choose between Move (it will shift the rest of channels) and
Exchange (it will exchange the position between 2 channels)
In the line Name you can modify the actual name of this channel.
The keyboard handling is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With the arrow buttons you can move the cursor in its position.
In this menu, the Green button change between normal and
capital letters and the RED button delete the letters.
With the OK button the selection will be done.
The receiver stores the changes when you leave the menu.
Please confirm by selecting with
OK the message.
3.1.6. List of favourite channels
With the buttons 1 to 8 from the numeric block you can select channels of the
favourite channel list 1 to 8.
At the column Favourite of the Channel List, you will see which Favourite list
each channel is from.
If you want to give to a favourite channel list an own name,
you can do it by pressing the button FAV.
With the buttons
you have to select one list.
In the line you can move the cursor with the buttons
.
The RED button delete letters and the Green button change between
normal and capital letters.
The keyboard handling is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With the OK button the selection will be done.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 22 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
4. PVR Management
IMPORTANT: This menu will be only available when it is connected to an external Hard Disk USB 2.0
properly formatted (FAT 32) as well as detected by the receiver.
The PVR Management is similar to a file viewer.
4.1. Play record
If you want play one record, you can do it by pressing the button
OK.
4.2. Lock record
With this function it is possible to lock one record and you need to give the
password before playing it.
If you want to mark a record for lock, please select the file and then press
the Yellow button Lock.
Behind this channel you will see now a symbol like the one at the right side.
In order to the function works properly, you have to activate the password
function in menu Parental Control.
4.3. Delete record
If you want to delete a recorded file, select it and press the Red (Delete) button.
Doing this, it will appear a menu requesting for confirmation to delete, press OK to delete or Exit to exit without deleting.
4.4. Movies, MP3, Photos
The file list contains the different file formats that can be played. You can differentiate them with the icon placed at the
left side of the file number.
You can select between:
±
Stored files
And folders
Ordering recorded files
options.
Pre-viewing window of
the selected file.
Information of the
selected file.
Movies
(
recorded b
y
receiver
)
Musi
c
in MP3 format
Pictures in JPEG or PNG format
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 23 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
4.5. Sorting
In order to have a better view, you can sort the files.
Please press the button LIST.
With
buttons you can select the following options:
Sort A to Z: Sort the files related to the first letter of the name in A,B,C….
Sort Date: Sort the files related to the file date.
Sort Size: Sort the files related to the file size.
Sort None: No sorting
4.6. HDD Management
In the HDD management submenu you can see the capacity of the
hard disk. You also see the free space available.
To open this menu, you have to press the button PVR.
The indicated HDD capacity is lower than the one the manufacture writes.
This is due to the manufacturers often counts as follows.
1 GB = 1.000.000 bytes
More correctly is 1GB = 1.024.000 bytes.
The result for this is that a 160GB HDD indicated by the manufacturer
the storage have real 148GB. This receiver shows you the real space.
If you want to delete the hard disk totally, you can do it with
the Yellow Button Format and the hard disk will be completely erased.
Caution: This process will delete also saves you have made with Backup tools.
4.6.1. Folder management
To keep sorted your HDD, you can create own folders.
To do it, open the folder management by pressing the button Text (copy)
and then press the Yellow (Add) button to create a new folder.
In one folder you can create again other folders.
The navigation inside the folder management is made with the
buttons
.
4.6.2. Delete folder
If you want to delete one folder with all included files, you can
do it with the Red button Delete.
Doing this, it will appear requesting for confirmation to delete, press OK to delete or EXIT to exit without deleting.
4.6.3. Lock folder
With this function it is possible to lock one folder, you will need to give the
password before playing.
If you want to mark a folder for locking, please select the file and then press
the Yellow button Lock.
Behind this folder you see now a symbol like the one at the right side.
In order to this function works properly, you have to activate the password
function in menu Parental Control.
±
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 24 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
4.6.4. Add folder
In the menu of Record Management, push the Text (Copy) button and you will
enter in a submenu.
With the Yellow (Add) button, you can add a new subfolder.
The keyboard handling is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With the arrow buttons you can move the cursor in its position.
In this menu, the Green button change between normal and
capital letters and the RED button delete letters.
With the OK button the folder will be created.
4.6.5. Move file
If you want to move one file to another folder, you can do it as follows:
If it is not opened, please open the PVR Management by pressing the button
PVR.
Press now the button TEXT to open the folder management.
It will appear two columns with the same files. The left column is the file
origin which will be moved, the right column is the destination where the file
will be moved.
You can select the folder by pressing OK when it has been selected. To
change the window where the selections are being done, use the GREEN
key and you will see the yellow highlighted to the other window.
Once selected the file to copy in the left column and the destination where it
will be copied in the right one, press the BLUE key to proceed to the copy or
movement of the file. You should have selected the origin file in yellow, in the
left column.
The receiver stores all the events in the folder PVR .
Please select with the buttons ►► and ◄◄ the folder where the file
is stored currently and press the OK button.
ORIGIN Files
Selection with
Destination folder
Selection with
ORIGIN Device
DESTINATION Device
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 25 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
5. Timers
In menu Timers you get one overview about all events which you have programmed.
These events can be store over EPG or direct in this menu.
5.1. Sorting
For having a better view, you can sort the events.
Please press for this the button LIST.
With
buttons you can select the follow options:
Sort Channel: Sort the list related to the first letter of the program name in A,B,C….
Sort Name: Sort the events related to the name of event in A,B,C….
Sort Start: Sort the files related to the start time.
Sort Pos: Sort the files by date of creation.
5.2. Delete Timer
With the Red button Delete you can delete events.
With
buttons you can select one event and then press the
Red button Delete, then confirm the following message.
5.3. Edit / Add timer
With the Green button Edit you can modify one event.
This can be useful, when you want to program one event and you do not
know exactly its starting or ending time.
With the Yellow button Add you can add manual one event.
The using of Add and Edit is the same.
Channel
Here you can change the channel which will be programmed.
Press the button
and select in the new menu the channel you want by
the buttons
and press OK.
Start date and time
selected of event
Frequency and PID
information for the
selected event
List with all events including
channel name and name for
the event
Menu options
Menu options
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 26 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Title
You can modify an existing title or create a new one.
If you want to change it, select this line by
buttons.
The keyboard handling is like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With the arrow buttons
you can move the cursor in its position.
In this menu, the Green button changes between normal and capital letters
and the RED button deletes letters.
Start / Stop
If you want to modify start and stop times, select this line by
buttons.
Press now
and select with the entry you want to change.
The entry will be modified by the buttons
.
When you have finished, press OK.
Repeat
The standard value is 1x, for one time recording.
With the buttons
you can choose the following options also.
2x - 6x This repeats the timer next day, at same time, same channel.
T This repeat the timer every day at same time, same channel.
W This repeat the timer every week at same time, same channel.
Monday – Friday It will repeat the timer since Monday to Friday in the same channel and at the same time.
Record
Here you can select if you want to store this event in an external device, or not.
If you select no, you can store one event through one DVD-Recorder over the connector VCR Scart.
Selection: yes- external or no
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 27 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
6. Tools
In this menu you can find two little helper tools.
The calculator is useful for fast calculations and with the calendar
you can mark dates for special events like birthdays.
6.1. Calculator
The using of the calculator is very easy.
With numeric block remote control, input the numbers.
For the calculations you use the colour buttons.
Red Button Addition
Green Button Subtraction
Yellow Button Multiplication
Blue Button Division
The button OK is used for = function.
With the buttons ◄ you restore the calculator.
6.2. Calendar
If you open the calendar, the yellow marked field shows the current date.
This will be shown in the line under the calendar.
With the buttons Fav- and Fav+ you can switch between the months.
With the buttons Pup and Pdown you can change the year.
In the first column it is marked the number of week in the year and one blue
marked field shows a stored event.
You can select the individual dates with the buttons
and .
Add one event (Anniversary)
If you want to add an event, select the date and press the
Yellow button Add Anniversary.
You can type the name for the event like in a mobile phone.
When you press one button several times you will have different results.
Example: If you press button 2: a, b, c and 2
With the arrow buttons
you can move the cursor in its position.
In this menu, the Green button changes between normal and capital letters
and the RED button deletes letters.
If you select later a blue marked field you will see the name info the field.
Delete one event
If you want to delete an event, you have to select it and then press the Red button delete Anniversary.
Change Alarm
Pushing the Green button, you can add an alarm to the event, you will see that this symbol (*) appears close to the
date. A visual alarm will appear in the screen the day of the event.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 28 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
7. CAS Configuration (Conditional Access System)
In this option, you can find the information related to the Conditional
Access.
Once this option is selected, the status of each slot is shown. If there is
no interface or it is wrongly introduced, the menu will show it as empty.
With one or the two of the CI modules correctly introduced, the data of
the inserted card will be shown. Please, follow the instructions shown on
the screen.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 29 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
8. System Settings
In the menu System Settings you will find all basic adjustments of the
Receiver.
8.1. Menu Language
Here you can choose the language which will be shown in the receiver.
You can select:
English, German, French, Spanish, Italian, Portuguese
Please select with the buttons
and then press OK.
8.2. Audio Language
Here you can choose the audio language for the TV and Radio channels.
Example:
If you select English and the channel you want to see have one
audio carrier in English, you will get the audio in English.
If there is no audio carrier in English, you will get the first one which is
supported in this channel, for example German.
You can select:
English, German, French, Spanish, Italian, Portuguese
Please select with the buttons
and then press OK.
8.3. Time Zone
In order to the receiver shows the correct time as well as adjusting the
records properly, it is needed the adjustment of the Time Zone where you
live.
For UK: Summer time: +1 hour
Winter time: GMT hour
Please select with the buttons
and then press OK.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 30 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
8.4. TV Settings
Here you can adapt your receiver to your TV set and you can select the
screen format.
TV-System
Select here which TV system your TV set support.
Selection: NTSC, PAL, Secam and AUTO
Please change with the buttons
.
TV-Format
Select here which TV format your TV set has available.
Selection: 4:3, 16:9 and AUTO, please change it with the buttons
.
RF Mode
If you connect your TV or Video set with one IEC coaxial connection at the
output TO TV, you will need to select which system is supported by this device.
Options: PAL M, B/G, I, D/K or NTSC , please change them with the buttons
.
RF Channel
Here you can select which channel the modulator has to use.
This is only needed if you connect your receiver with the IEC coaxial connection at the
output TO TV to your TV set.
Selection: Channel 21 to 69 , please change with the buttons
.
Picture Format
This option is only available when you have not selected TV format in mode AUTO.
Options: Pan&Scan or Letter Box , please change with the buttons .
In this option you can choose how the pictures in films with a big format will be adapted to your TV set.
If you select Pan&Scan you will see one part of the film and at the left and right sides it will be cut
In Letter Box, the picture will become smaller and you will see on top and bottom two black bars.
TV output
This option allows choosing how the receiver will send the colours to the TV set.
Selection: CVBS , RGB, SVIDEO or YUV , please change with the buttons
.
Loop VCR
Here you select the priority of an external video signal.
If you have selected Slave, the receiver shows every time the signal coming from the VCR Scart connector, when there
is signal available. It also can be a signal from DVD player or recorder.
If you have select Master , the signal from receiver has priority and you will see only the signal from connector VCR
scart when the receiver is in Standby mode.
Selection: Master or Slave , please change with the buttons
.
LPC Mode
This receiver has a special LPC mode for saving current. This reduces the consumption in Standby mode.
Please check your settings in menu Loop VCR . In the LPC mode, the antenna signal keeps cut at the output TO TV ,
so if you use the antenna signal to watch the TV through the receiver, you should disable it.
Selection: ON or Off , please change it with the buttons
.
The LPC function has 2 consequences. The first one is the time it delays to switch from Stand By to
working mode, and the second one is that in this mode, the signals which has to pass through the
tuners or the modulator are attenuated because off the unfeeding from the main board. If whatever of
these 2 effects are disturbing you during the use of your PVR, just disable this function.
Sleep
If you want shut down the receiver automatically, you can choose here the time for the sleep timer.
Selection: 15, 30, 45, 60, 75, 90, 105, 120 or Sleep Off
Please change it with the buttons
.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 31 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
8.5. Recording Settings
Impulsive Recording Limit
Select here how much time do you want to record when you activate
the function Fast Recording.
Selection: 1, 2 or 4 hours
HDD Manager
Not available in this model
USB
In this menu you will see the total space and the free space of your
USB device. You also can format this device.
Margin REC EPG (Before)
Here you can indicate if you want that the recording begins before the starting time of the EPG.
You can select among 0, 5, 10, 15 or 30 minutes.
Margin REC EPG (After)
Here you can indicate if you want that the recording ends after the ending time of the EPG.
You can select among 0, 5, 10, 15 or 30 minutes.
Disable HDD
Not available in this model
8.6. OSD Settings
Remote control
Here you can change the transmission code for the remote control if
you have problems with other devices.
Please change it with the buttons
.
For saving the changes, please press OK .
Do not forget to change also the code on the remote control.
For this, press the button CODE on your remote control until the correct LED is
lighting.
You have to select the same position in the receiver than in the remote control.
Info bar delay
Here you can select how long the information of the OSD will be displayed on the
screen.
Selection: 1 to 10 sec.
Please change it with the buttons
.
Number of Sequential Channel
Selecting Yes in this option, the positions of the channels will be occupied continuously and sequentially. Although you
move the position of one channel, you will shift the positions to avoid leaving empty channels.
Selecting No, you can leave empty channels if we shift the position of one channel.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 32 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
8.7. Geographical location
For the adjustment of positioners with the USALS system, it is necessary to
have the information about Latitude and Length of your location.
8.8. Version
Here you get information about the hard and software from your receiver.
Manufacturer Manufacturer of the receiver.
Model Exact article name.
Hardware Revisions number from main PCB
Loader Version for boot loader
Software Version for installed software
FP Not available in this model
Guarantee Beginning of the warranty time
CRC Checksum of the EEprom
8.9. Factory Default
With this option you can restore the receiver totally to the status when the
receiver was used the first time.
Caution: Make this only if you are 100% sure, this step can is
irreversible.
8.10. Software Upgrade
With this menu you can transfer data and install new software.
With the buttons
you can choose between the following
possibilities.
Serial port (Download) Start data download via RS-232 connection.
Serial port (Upload-ALL) Send all stored channels and main software to other receivers by using
RS-232 connection.
Serial port (Upload-Backup) Send the backup file (receiver database) and software to other receivers by using
RS-232 connection.
For this, the receiving receiver must have been executed a factory default before.
Serial port (Upload-UserDB) Send all stored channels to other receivers by using RS-232 connection.
Serial port (Upload-APP) Send the receiver software to other receivers by using RS-232 connection.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 33 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
USB (Download) Start the data download via USB.
Caution, on USB Stick can be only one receiver file.
Upload-ALL or Upload Backup create two files.
usbupdate_userdb_VX_X_XX.bin Database
usbupdate_VX_X_XX.bin Software
Both can be used but one must be delete manually on PC.
USB (Upload-ALL) Send all the stored channels and main software to USB-Stick.
This create two files.
USB (Upload-Backup) Send the backup file (receiver database) and software to USB-Stick.
This create two files.
USB (Upload-UserDB) Send all stored channels to USB-Stick.
USB (Upload-APP) Send the receiver software to USB-Stick.
Air (now) Starts data download via OTA immediately
Air (programmed) Starts data download via OTA at a programmed time
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 34 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
9. Parental Control
With this menu, you can activate the parental control where is necessary
to give one password before opening channels or making settings.
9.1. Set Lock
To activate the parental control, select with
button Set Lock
and then press
.
You have to give the standard code 0000 or your individual one with the
numeric block from the remote control. Then press OK button.
9.2. Channel lock
Here you can activate the parental control for channels if you have marked
it in Channel Management for Lock.
For this, select with the buttons
the line Channel Lock and
than press
.
You have to give the standard code 0000 or your individual one with the
numeric block from remote control. Then press OK button.
9.3. Record Lock
Here you activate the parental control for recording events.
For this, select with the buttons
the line Record Lock
and than press
.
You have to give the standard code 0000 or your individual one with the
numeric block from remote control. Then press OK button.
9.4. Installation Lock
Here you cane activate the parental control for the menu Parental control,
System Settings and Installation.
For this, select with the buttons
the line Installation Lock
and then press
.
You have to give the standard code 0000 or your individual one with the
numeric block from remote control. Than press OK button.
9.5. Change Password
When you want to change the standard password, select for this with the
buttons
Change Password and press OK button.
Old Password Input here the actual password
New Password Input here the new password you want.
Password must have 4 digit.
Retype Password Retype here the new password
and press OK button.
If you loose in any time the standard or your individual
password you can unlock it with master password 5100.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 35 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
10. Installation
Over this menu you can search for new channels Channel Search,
modify the frequency list MUX Management, or make backups.
10.1. Antenna configuration:
In this menu you should configure the signals that are connected at the
inputs IF IN of your PVR.
By default, the equipment comes with the configuration that you can see in
the Picture with four satellites.
The available options in this screen allow:
Red button: Deletes the selected satellite. It requests for confirmation.
Green button: Edits the selected satellite. The option appears in the
following image.
Yellow button: Adds a satellite. The options appear in the below image.
Antenna Options:
− LNB Type: There are two available
bands: C and Ku. The difference is
basically the transmission frequency.
The Ku band has two possibilities, the
most common is the universal Ku.
− Satellite: Your PVR is provided with
several satellites pre-stored. You can
find the one you want in the list or to
add a new one. They are sorted by its
orbital position. With the key
you can
access to the available satellite list.
− Low Band / High Band: It is used when
the band selection is Ku one, and it
programmes the Local Oscillators of the
LNC.
− DiSEqC 1.0 / 1.1 Ports: To configure
the use of antenna switch. These switches allow the reception of different satellites in a single input.
− Motor: Enables the function of using a motor to direct the antenna.
− 22 KHz: Tone to switch the band of the LNC.
− LNB Power: Feeding to the LNB. By default the selection is the one for an universal LNB.
− Signal: It shows if there is an available signal in the selected configuration.
Alter whatever change, you should confirm with the OK button when you exit the menu.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 36 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
10.2. Channel Search: Satellite
Once the antenna configuration is completed, you should proceed to tune
the satellite channels that you have selected. There are different ways to
tune the channels: through LNB, through Satellites and through
Transponders.
When you select the channel searching through LNB, you only can select
one LNB, which corresponds to the programmed tuner.
When you are searching by satellites, you are allowed to select a Wide
range of satellites, so you could programme the searching of all the
satellites that you have configured.
The searching through Transponder is the most selective. It allows selecting
all the frequencies that you’re going to tune and searching channels.
In whatever selection, you always will have available to search Free To Air
channels (uncoded channels), channels with Conditional Access or All the
channels.
Please, choose the searching pressing the Green button. Once you have
finished (the time will depend on the number of transponders it will have to
find) you will get a window like the following one:
Detected TV Detected
Channels Radio Channels
Level and Quality
Searching process
Meter
You can select the channel searching whenever pressing the Exit button.
Once the searching is finished, you must confirm the storing of a new Channel List.
Press the OK button.
The receiver will come back to the Channel Search menu.
You can search again if you want, or exit by pressing the Exit button.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 37 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
10.3. Satellite Management
Your receiver are provided with a very important pre-stored satellite list, if
in addition you want to add some one more or to change the parameters of
some channels, these functions are made through this menu. The
available options are:
Delete Satellites
If you want to delete one satellite, you can do it with the Red (Delete) key.
Doing this, the receiver is requesting you the deleting confirmation, with
the OK button you will erase the satellite, with the Exit button you will
cancel.
Edit satellites
With the Green (Edit) button, you can modify the parameters of one satellite. The
editable parameters with its orbital position in degrees and direction, the name as
well as the transmission band (C, Ku or both).
Select with the buttons
the row and with the values,
and press OK to confirm.
To edit the name of the satellite, the handling of the keyboard is the same than the
one of a cellular telephone: pressing one button some times, you will choose the
wished letter. Example: if you push the key 2: a, b, c and 2 will be shown. With the
arrow buttons you can place the cursor in the wanted button. In this menu, the
Green key changes between capital and normal letters, with the Red key, it erases
the last character.
Add satellites
With the Yellow (Add) button, you can add a satellite. The process is exactly the same than the before one, with the
difference that the menu does not have data.
Skip Satellite
With this function it is possible to skip one satellite in the fast searching channels process.
The marked channels will be not selected where you search channels. Please, ensure that you mark the satellites
correctly. It will appear in the right column the icon:
To select the satellites, use the buttons
and . Press the Blue (Skip) button to mark them.
You can place marks in more than one satellite.
10.4. Transponders Management
In the transponders management, we will have a screen like the following one:
The options you have right with the list are the following ones:
Delete Transponder: The RED key allows you to make a multiple selection of transponders to be deleted. When you
select a TP, it will appear the icon in its column, when you exit of the menu, you will be requested to confirm the
changes.
With the TV/R they are
shown the TP of the C, Ku
or both bands.
UIT the LIST key you can
change the sort which with
the TP are shown. You can
change the sort of the TP
List, you can sort them by
frequency or by polarity.
With the EPG they are
shown the different pre-
stored satellites and when
you select whatever of
them, it is shown the TP of
this satellite.
Data block of TP where it is
shown the satellite frequency
of transmission, polarity,
symbol rate and FEC. Last
two columns are for the
selection of erasing and skip.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 38 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Edit Transponder: This function with the GREEN key will allow you to vary the parameters of the transponder. You can
change the frequency, polarity, symbol rate and FEC. This last parameter can be changed to AUTO mode in case of
unknowing it.
Add Transponder: Like in the previous step, the YELLOW key, allow adding new TP to the list.
Skip Transponder: In this function, with the BLUE key, allows that one transponder will be keeped in the list but it will be
not tuned.
Whatever change made over the list of transponders will need to be confirmed with OK button when you exit the menu.
10.5. Antenna power
If you use this receiver with an active antenna DVB-T, you can give it
directly 5V for feeding it.
For this select with the buttons
the line Antenna power
and then press OK.
Select now with
the line 5V and then press OK.
10.6. Channel Search: Terrestrial
This receiver has no pre programmed channel list, because DVB-T
configuration changes in every different area.
Start the channel searching process by pressing the Green Button.
The receiver searches now in all TV frequencies.
You may stop searching by pressing the button Exit .
Once the search is finished, you must confirm if the new found channels have to be stored.
Press for confirm the OK button.
Now you come back to menu Channel Search.
You can start a new search again, or you can close the menu now with the button Exit .
Search status
Current channel
Radio Channels
detected
Channels which the receiver
has found, currently 11
Signal Power and Quality
meter related to the selected
frequency
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 39 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
10.7. MUX Management
Here you can modify the frequency list of the channels. In normal conditions,
you do need no handling.
Delete Frequency
If you want delete one frequency, you can do it with the Red button Delete.
Doing it, you will see now one symbol like the one at the right side.
You can mark more than one lines, all of them will be deleted when you close the
MUX Management.
Edit / Add Frequency
With the Green button Edit you can modify one frequency,
and with the Yellow button Add you can add one new frequency .
The use of Add and Edit is the same.
Please input here the middle frequency of one carrier.
Example: CH 26 is from 510 up to 518 MHz
The correct frequency is 514MHz
In the line BW you have to select the bandwidth for this frequency.
Normally is in VHF band 7MHz, and in UHF 8MHz.
If everything is done, press OK button.
Skip Frequency
With this function it is possible to skip one frequency in the channels searching
process.
The marked frequencies will not be checked when new channels are searched,
so make sure before marking these channels.
For marking the frequencies, select it with the buttons
and
and then press the Blue button Skip.
You can mark more than one frequency.
10.8. Channel Search: IP
The receiver will carry out a search for channels broadcasted by other
equipment connected to the network.
You can receive transmissions of other equipment in mode Unicast and
Multicast.
- Unicast is when the information is sent from a unique sender to a
unique receiver.
- Multicast in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
In Search Type select Auto to search for all the channels which are
broadcasted by other equipment in your network in multicast mode. If you
select the Host option, it will look for transmissions of the equipment present
in the list Network Management that you select.
In the field Multiplex you should select the hosts from the list Network
Management in which you with to search for channels.
Pressing the Blue button or
a new window will appear, where you can
select the hosts.
You can move the cursor with
.
With the Green button you select the hosts.
Press Exit to go back to the search menu.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 40 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
If you press the Green button, it will carry out a search of the video IP channels.
Press Exit to exit.
10.9. Network Configuration
The receiver will require the introduction of the needed parameters to be able to get connected to a
network, as well as to be visible to other equipments so that receive streaming of video and audio.
You should introduce the following parameters:
IP Address Number of 32 bits expressed in 4 numbers between
0 and 255 which identifies the receiver inside its
network.
Every device in the network should have a different
IP Address and it is highly recommended that all of
them are in the same subnetwork and with IP
addresses into the following range:
10.x.x.x
172.16.0.0 – 172.31.255.255
192.168.x.x
Subnet Mask Number in IP format that, combined with the IP address, identifies where the equipment is.
IP LAN Soft: IP address of the PC where the application for exchanging video streamings between the
PC and the receiver is installed.
If you want, you can download the application IP LAN Soft from the Website:
www.ftemaximal.com
MAC Device address at hardware level. It is unique in each device and it comes from the factory.
You can move through the menus with the buttons
and .
With the Red button you delete the last character.
Press OK to save the changes.
10.10. Streaming Configuration
This receiver can send streaming to other equipment connected to the
network.
You can send video streamings in Unicast and Multicast modes.
- Unicast is when the information is sent from a unique sender to a
unique receiver.
- Multicast in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
This receiver can only send terrestrial channels streams
In this window you can configure the network parameters of the device at destination:
Streaming You should select On so that the receiver sends the streaming.
Address IP Address of the destination device.
You can simultaneously send the streaming to different devices in case that in this
field a multicast IP address is introduced.
Destination port Communications port where the information is sent.
The port must be a pair number into the range between 1024 – 65534.
Streaming protocol You can select the communications protocol. Options: UDP or RTP.
Current Channel It allow you to fix the number of transponder that is going to be sent to the destination receiver.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 41 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
No: Always will be sent to the receiver at destination the indicated cannel in the field Channel,
and the origin receiver only will be able to see any cannel belonging to the same transponder
which is indicated in the Channel field, or IP channels.
When you see an IP channel, the streaming sending process will stop.
Yes: the receiver will send the channel which is tuned locally. Every time you change the channel
in the receiver, you must tune the same in the destination receiver.
Channel: Service to be sent. Only available when you select No in the field Current Channel.
You can move through the menu with the buttons
and .
With the Red button you delete the last character.
Press OK to save the changes.
10.11. Network Management
In this menu you can manage the equipment you decide to receive streaming
from, in mode Unicast.
You can move through the list with the buttons
.
Pressing the Red button you can delete a host from the list.
With the Yellow key a new window will appear where you will be able to add
a new host.
At IP Address introduce the IP address of the sender device.
Every device in the network should have a different IP Address and it is
highly recommended that all of them are in the same subnetwork and with IP
addresses into the following range:
10.x.x.x
172.16.0.0 – 172.31.255.255
192.168.x.x
At Port introduce the number of the port where the information will be
received. The port must be a pair number into the range between 1024 –
65534.
You can move with buttons
and .
With the Red button you will delete the last character.
Press OK to add the new host.
With the Green button you can edit the information of the selected host.
With the Blue button the receiver will not take into account the selected
receiver when you carry out a search of IP channels.
10.12. SatcoDX Update
SatcoDX is a standard created by TELE-SATELLITE to update and keep
updated the list of channels and TP of your receiver. You can find more
details in the website: www.satcodx.com
10.13. Backup
Here you can save and load personal backups.
Load Backup
This function load one backup from internal receiver memory.
Save Backup
This function saves one backup to the internal receiver memory.
This process overwrites whatever backup made before.
Delete Backup
This function deletes one backup in the internal receiver memory.
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 42 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
11. The equipment of the receiver
11.1. Technical data
The features of a digital receiver depend only on a part of its hardware / electronic components.
A big part of the functions are made by the software.
General
Reference I-PVR ST192 CI HDMI
Code 0720112
Reception range DVB-S, DVB-T, IPTV
Memory places 5000
OSD Language
English, German, French, Spanish, Italian,
Portuguese
Codes for remote control 3
HDD Connection USB 2.0 / FAT32
Electronic Program Guide (EPG) Yes
Picture In Picture function (PIP) Yes
LPC mode for save current in Standby Yes
Time Shift Yes
Fast Record Function Yes
Recording over EPG Yes
Play MP3 music Yes
Play JPEG / PNG pictures Yes
Integrated tele text decoder Yes
Memory for tele text 800 pages
Data connections RS-232, USB 2.0 HighSpeed
COMMON INTERFACE 2 CI modules
VIDEO
Decoding MPEG-2 & MPEG-1 compatible
Bit Rate Max 15Mbps
Output NTSC/ SECAM / PAL
Screen format 4:3 / 16:9 / Auto
Resolution 720X480 @ 30fps; 720X576 @ 25fps
Connections Scart, HDMI or RCA
AUDIO
Decoding MPEG-2/MEPG-1 layer 1&2
Sampling rate 32 / 44,1 / 48
Connections Scart, HDMI, RCA, AC3 coaxial, AC3 optical
DEMODULATION
Demodulation QPSK, COFDM 2k, 8k
FEC All supported by DVB-S
Guard 1/4, 1/8, 1/16, 1/32
Input data rate 2-45 MS/s
INPUT SIGNAL
Frequency range Terr: 47–862 / SAT: 950–2150 MHz
Input level Terr: 32 ~ 90 dBuV / SAT: 42 ~ 82 dBuV
RF MODULATOR
Band UHF C21-69
TV Standard PAL BG / I / DK, NTSC
Output channels 21~69(PAL), 14~83(NTSC)
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 43 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
NETWORK
Network Interface 10/100 (RJ45) half/full duplex, auto negotiate
Network Protocols (over IP v4)
UDP/RTP
SAP/SDP
TCP
IGMP v1, v2
Input Max Bitrate 9.4 Mbps
DIVERS
Current supply for antenna
Terr:5V / 75mA
SAT: 13/18 VDC – 0/22 Khz 500 mA max
DiseqC Control DiseqC 1.2
Power supply 100~240VAC 50Hz~60Hz
Power consumption 35 W
Consumption in Standby with LPC active < 3 W
Operation temperature +5° to +40°
Size (B×T×H) 360×250×65mm
Weight 2,2 Kg
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal I-PVR ST192 CI HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal I-PVR ST192 CI HDMI in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal I-PVR ST192 CI HDMI

FTE Maximal I-PVR ST192 CI HDMI User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info