505111

FTE Maximal I-PVR ST192 CI HDMI Manual

11
Zoom out
Zoom in
Previous page
1/43
Next page
User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve - 11 - I-PVR ST192 CI HDMI Version en_1.0 FTE Maximal
Antenna Options:
− Name: Your receiver disposes of several pre-configured satellites. You
can find the one you want in the list or add a new one. They are sorted
by its orbital position.
− Band: There are two available bands: C and Ku. The differences
basically are the frequencies in the transmission. The Ku band has two
possibilities; the most common is the Universal Ku.
− Low Band / High Band: It is used when the band selection is the Ku, and
it programmes the local oscillators of the LNC.
− DiSEqC 1.0 / 1.1 Port: To configure the use of switches.
− Motor: Activates the motor option to direct the antenna.
− 22 KHz: tone of switching the band of the LNC.
− LNB Power: LNB Feeding. By default the selection is for an Universal
LNB.
− Signal: It shows if there is available signal in this selected configuration.
Alter whatever change, it should be confirmed with the OK key when you exit the menu.
Channel Search: Satellite
Once the antenna configuration is completed, you should proceed to tune
the satellite channels that you have selected. There are different ways to
tune the channels: through LNB, through Satellites and through
Transponders.
When you select the channel searching through LNB, you only can select
one LNB, which corresponds to the programmed tuner.
When you are searching by satellites, you are allowed to select a Wide range
of satellites, so you could programme the searching of all the satellites that
you have configured.
The searching through Transponder is the most selective. It allows selecting all the frequencies that you’re
going to tune and searching channels.
In whatever selection, you always will have available to search Free To Air channels (uncoded channels),
channels with Conditional Access or All the channels.
Please, choose the searching pressing the Green button. Once you have finished (the time will depend on
the number of transponders it will have to find) you will get a window like the following one:
Detected TV Detected
Channels Radio Channels
Level and Quality
Searching process
Meter
You can select the channel searching whenever pressing the Exit button.
Once the searching is finished, you must confirm the storing of a new Channel List. Press the OK button.
The receiver will come back to the Channel Search menu.
You can search again if you want, or exit by pressing the Exit button.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FTE Maximal I-PVR ST192 CI HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FTE Maximal I-PVR ST192 CI HDMI in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FTE Maximal I-PVR ST192 CI HDMI

FTE Maximal I-PVR ST192 CI HDMI User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info