674577
33
Zoom out
Zoom in
Previous page
1/48
Next page
33
NOTE: always completely remove the pan from the appliance before adding ingredients to the basket. Don’t
push on the release button to do so.
4. Place the food into the basket.
NOTE: Do not fill the basket more than 4/5, or the mentioned amount indicated in the above grid. Larger
quantities will give a lesser result.
CAKE FUNCTION: put the cake dough into the baking tin, the baking tin into the basket and place the
basket in the pan.
5. Put the pan back into the appliance. Never use the pan without accessory with handle.
CAUTION: Don’t touch the pan during or for some time after use, as it gets very hot. Only hold the pan by the
handle.
6. Set the baking time for the ingredients with the symbol . Standard it will start at 10 minutes. Press
or to adjust the baking time. Add 3 minutes to the advised baking time if the appliance is cold.
NOTE: Press to start the appliance after setting the time. Time and temperature can be adjusted while
operating. The system starts 5 seconds after confirmation of the settings.
7. Some ingredients require shaking halfway through the baking process. To shake the food, take
the handle, pull the pan out of the appliance and shake. Then replace the pan into the
appliance. There is no need to interrupt the baking process by pressing it stops
automatically when the pan is removed and starts again automatically when the pan is put back. The display
now shows a 5. The appliance will count down from 5. If the pan is placed in the appliance again within 5
minutes, the program will simply pick up where it left off. However, if the pan is not placed back into the
appliance within 5 minutes the appliance will go into standby mode.
NOTE: do not press the release button on the basket while shaking.
TIP: to minimize the weight, you can remove the basket out of the pan and only shake the basket. To do so,
remove pan with basket from the appliance, place on a heat resistant surface, and press the release button to
release the basket.
8. When you hear the sound signal 3 times, the set program is finished. The word “End” appears on the
screen and the appliance goes into standby mode. Remove the pan from the appliance and put it on a
heat resistant surface.
9. Check if the ingredients are ready. If not, put the pan back in the appliance and set a few more minutes.
10. To remove small ingredients out of the basket (e.g. fries), press the release button and remove the
basket from the pan.
Do not turn the basket upside down when it is still in the pan. Any redundant oil or residues that fell
in the pan could fall on your ingredients.
After use, the pan and the ingredients are still very hot. Depending on the type of ingredients steam
may escape from the pan.
TIP: To remove large or fragile food, it is best to use a kitchen pincers.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fritel SnackTastic 4802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fritel SnackTastic 4802 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info