787184
6
Zoom out
Zoom in
Previous page
1/14
Next page
Climobile
6
EN
II Operating Instructions of the Remote Control
1. Power: on/off
2. Mode: choose operating mode
3. Up: press the key to increase temperature
and set value for timer.
4. Down: press the key to reduce temperature
and set value for timer.
5. Fan: press the key to select high, medium
and low fan speed output.
6. Timer: press the key to activate timer.
7. Swing: press the key to open or close swing
hatch. Air ow of the air outlet can blow at
different angles.
8. °C - °F: press the key to switch between
Celsius and Fahrenheit.
Remote control Remote control with
heating function
III A Variety of Protection Functions
3.1 Frost Protection Function:
In cooling, dehumidication or economic power
saving mode, if the temperature of the vent
hose is too low, the AC will automatically enter
protection status; if the temperature of the
vent hose rises to a certain temperature, it can
automatically revert to normal operation.
3.2 Overow Protection Function:
When water in the water pan exceeds the
warning level, the AC will automatically sound
an alarm, and the LDC screen will show "FL".
At this point, you need to move the drainage
pipe connecting the AC or the water outlet to
a sewer or other drainage area to empty the
water (details, see Drainage Instructions at the
end of this chapter). After the water is emptied,
the AC will automatically return to the original
state.
3.3 Automatic Defrosting (heating and cooling
models have this function):
The AC has automatic defrosting function:
during defrosting, heating symbol on the
screen will ash.
3.4 Automatic Thermal Protection:
To protect the service life of the AC, the AC has
automatic thermal protection in heating mode.
During the protection period, the compressor
and the lower motor will stop operation and will
automatically return to normal heating state
after the temperature of the AC recovers.
3.5 Protection Function of the Compressor
To increase the service life of the compressor,
it has a 3-minute delay booting protection
function after the compressor is turned off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frico CLIMOB09 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frico CLIMOB09 in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info