Manual Frico CLIMOB09 (page 4 of 14) (English)

787184

Zoom out

Zoom in

1/14

Climobile

Installation

The unit can be easily moved in the room. In

the moving process, ensure that the it is in the

upright position and it should be placed on a

at surface.

1.1 Install the vent hose (as shown in g.1):

screw the vent hose (exhaust tting end)

into the exhaust port on the rear panel

(counterclockwise).

1.2 Install the window cover plate

1. Half open the window, and mount the

window cover plate to the window (as

shown in g.2 and g.3); it can be placed in

horizontal and vertical direction .

2. Pull various components of the window

cover plate open, adjust their opening

distance to bring both ends of the cover

plate into contact with the window frame,

and x the various components of it.

1.3 Install the unit.

1. Move the unit with installed vent hose

and ttings before the window and

the distance between the unit and walls

or other objects shall be least 50 cm (as

shown in g.4).

2. Elongate the vent hose and snap the at

end of the vent hose joints into the elliptical

hole of the window cover plate (as shown in

g.5 and g.6) .

Notes:

• The at end of the vent hose joints

must be snapped into place.

• The hose cannot be distorted nor

has substantial turning (greater than

45 °). Keep the ventilation of the vent

hose unobstructed.

Important Notice

The length of the vent hose shall be

280~1,500 mm, and this length is

based on the specications of the AC. Do

not use extension tubes or replace it with

other different hoses, or this may cause a

malfunction. Exhaust must be unobstructed;

otherwise it may cause overheating.

Fig.1

j ••

Fig.2 Fig.3

Fig.4

Fig.5 Fig.6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Frico CLIMOB09 in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Frico CLIMOB09 Manual

Product: