Manual Franke FIM 1100 W XS (page 7 of 60) (English, German, Dutch, French, Italian, Spanish)

510247

Zoom out

Zoom in

1/60

a. IN THE EXTRACTION MODE:

Place the anti-backﬂow ﬂats item 9 over the round outlet ,

the telescopic duct and connect the ducting 150mm (6 INS)

over the round outlet on top of the canopy and secure the

connections withappropriate clamping rings or adhesive

tape (

Fig. 3).

b. Remove the grease ﬁlters (see paragraph Maintenance)

Fig. 4 being sure that the connector of the

mains cable is

correctly inserted in the socket placed on the sides of the fan.

Before ﬁtting the chimney to the canopy make the electrical

connection as described in the section titled ELECTRICAL.

When the electrical connection has been made, test the

lights and the fan motor.

d. Each chimney stack consists of two sections. Fit the upper sections

(Fig. 6 - item 2.1 & 2.2) first by expanding the chimneys slightly to

allow them to clamp around the bracket item 7.1 and secure the

chimney stacks to the brackets using the two M4 screws item 12c

provided. Fit the lower chimney

sections by expanding the chimneys

e. Fit the 3 front cover Item 3 - Fig 10.

IN THE RECIRCULATION MODE:

Fit the recirculation spigot 15 onto the upper chimney wall

bracket using the same ﬁxing screws (Fig. 1 item 7.1).

Connect the ducting 150mm (6 INS) not provided between

motor and the recirculation spigot item 15 and secure the

connections with appropriate clamping rings or adhesive

tape (Fig. 3)..

c. IN THE RECIRCULATION MODE: Insert the charcoal

ﬁlter

into the base of the motor housing and secure the ﬁlter with

two metal securing straps item A as illustrated in Fig. 5.

f. IN THE REMOTE MOTOR MODE AND WITHOUT CHIMNEY:

Note: The Fig. 7 & 8 correspond to the versions without Motor and without chimney (SMC or WMC).

Fig. 3

Fig. 4

slightly to allow them from the top of the canopy to clamp around the

upper chimney sections.

12c

2.2

2.1

Fig. 5

Fig. 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Franke FIM 1100 W XS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Franke FIM 1100 W XS Manual

Product: