669064
8
Zoom out
Zoom in
Previous page
1/52
Next page
Frama Matrix F12
8
1.2. Use as intended/Notes on print quality
The following notes are intended to support you in achieving a sharp, professional print with your Frama Matrix F12
franking system, so as not to jeopardise the delivery of your franked mail. As the user, you are responsible for the
legibility of your franking.
Information
1. Your franking machine must be properly registered with the Royal Mail before you use it for the
first time. Follow the instructions given by your local Frama Sales and Service organisation when
you do this.
2. Each franking mark may be used only once. The Royal Mail (Specific Country Post) regards
repeated use as a punishable offence and a violation of the general terms and conditions of
business.
3. Test franking marks or sample franking impressions are not regarded as valid by the Royal Mail
and items bearing them may not, therefore, be mailed.
4. The use of fibrous and other unsuitable envelopes can result in the marks blurring or smearing
marks and thus to the franking marks being illegible. In view of this, you are urgently advised
not to use envelopes of this kind. Do not use very absorbent or fibrous envelopes for this rea-
son. This could invalidate your franking.
5. The use of high gloss envelopes, which could offer insufficient contrast with the franking mark,
is not permitted.
6. Do not frank mail items thicker than 10 mm. You risk allowing the printing head to touch the
surface of the mail item and thus smearing the franked mark. You should therefore always use
Frama Matrix F12 franking labels for thick letters and packets.
7. Please make sure that no sharp objects, such as paper clips, are near the franking zone. Such
objects can damage the franking system.
8. Ink jet cassettes must be checked regularly to ensure high-quality printing. After a certain time
the printing head is sealed to prevent the individual nozzles from drying. Do not, therefore,
switch the franking system off immediately, but wait until the print head is sealed, or use the
Log off button.
9. Please run a print head test and clean the print head using the Nozzle Cleaning function (sec-
tion 5.6.2. Nozzle cleaning on page 33) should you have the impression that there are lines
missing from the franked mark.
1.3. Requirements for the network environment/information security
Information
1. The franking system is connected to the user's local area network by Ethernet and by the user's
internet access correspondingly provided to exchange data with the FramaOnline2 data centre.
2. Frama guarantees that no other data that are not relevant for the franking system from the
user's network will be used, transmitted or read.
3. The user must take measures to ensure the integrity and security of the network at all times
when operating the franking system on the company network.
4. The PC interface is not active.
5. Consult the IP Configuration Manual (www.frama.com download area for further informa-
tion on connecting the franking system.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F12 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama MATRIX F12

Frama MATRIX F12 User Manual - German - 58 pages

Frama MATRIX F12 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info