669064
7
Zoom out
Zoom in
Previous page
1/52
Next page
Frama Matrix F12
7
1. SYST
EM PRESENTATION
1.1. Safety instructions/Notes on use
Danger
1. Use this franking system indoors and for franking post and franking labels only. Any other use,
modification or change to the franking system is not permissible and may be dangerous. The
manufacturer accepts no liability for damage caused by use contrary to the intended use or
incorrect operation.
2. Check the franking system for external damage before setting it up. You may be putting your
life at risk by using a damaged machine.
3. A damaged connecting lead may only be replaced by a lead of the same type.
4. A current overload protector must always be fitted in buildings in which the franking system is
plugged into the mains network.
5. Check the cable and plug before installing the system. Have any damage repaired by a specialist
electrician only.
6. Only connect the plug into a mains socket when the franking machine housing is closed.
7. Always run the mains cable away from the rear of the franking machine and make sure that no
risk exists of it being damaged or someone tripping over it.
8. Never pull the plug out of the socket by the mains cable.
9. Never reach into the printing unit. Your fingers could be injured if the franking machine is
switched on. Be careful if you are wearing long hair, a tie, etc.
10. Do not reach into rotating parts. There is a risk of injury.
11. Keep children away from the franking system.
12. Have your franking system repaired by a service technician from your local Frama sales and
service organisation only. Never open the franking system yourself under any circumstances.
Repairs carried out incorrectly can represent a significant hazard to the user.
1.1.1. Correct use
Danger
1. Use accessories intended for this system only. The use of accessories that are not approved, or
not authorised, can be detrimental to the service life of the franking system. At the same time,
a danger to the operator can be created.
2. Always keep your fingers and other parts of the body, ties, necklaces, scarves, open sleeves
and similar loose things away from the feed entry area and the rollers. There is a risk of injury
on rotating parts.
3. Do not clean the system with flammable fluids. There is a risk of explosion.
4. Disconnect the system from the mains before cleaning it. Clean the system with a damp cloth
only. Do not spray any liquids on or into the franking system. There is a risk of electric shock.
Lethal hazard.
5. Do not place any liquids, glasses, franking ink, etc. on the franking system.
1.1.2. Installation notes
Information
Your Frama Matrix F12 franking system was manufactured for use in normal conditions. Please re-
member: Today’s furniture is coated with a confusing variety of paints, lacquers and synthetic mate-
rials. In view of this, it is quite possible that some of these materials contain constituents which can
attack or soften the plastic feet of our equipment. The feet of our equipment, if affected by foreign
substances, can stain your furniture. Frama is unable to accept any liability in this respect for obvious
reasons. With this in mind, use a non-slip underlay.
Avoid exposing directly to sunlight.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F12 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Frama MATRIX F12

Frama MATRIX F12 User Manual - German - 58 pages

Frama MATRIX F12 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info