669065
35
Zoom out
Zoom in
Previous page
1/57
Next page
Frama Matrix F10 / F12
35
5.5.7. Statistics report
The statistics report is used to print out the statistics for the current period. The data collected cor-
respond to the items you have mailed in the time between two connections with the FramaOnline2
data centre. The report extends over several pages (depending on the volume of statistics).
After connecting with the FramaOnline2 data centre, the statistics are automatically deleted and
then recompiled using your consumption data.
5.5.8. Specimen
Use this function to run a postage test print to allow you to assess the print quality, for instance. No
postage is used.
The postage test prints may not be used for franking mail items.
5.6. Printer Settings
Information
1. Do not frank mail items thicker than 10 mm. You risk allowing the printing head to touch
the surface of the mail item and thus smearing the franked mark. You should therefore al-
ways use Frama Matrix F10 / F12 franking labels for thick letters and packets.
2. Please make sure that no sharp objects, such as paper clips, are near the franking zone.
This can damage the print head.
3. Do not use very absorbent or fibrous envelopes which could prevent a cleanly printed
mark. This could invalidate your franking.
4. The use of coloured envelopes which offer insufficient contrast with the franking mark is
not permitted.
5. After a certain time the printing head is sealed to prevent the individual nozzles from dry-
ing. Do not, therefore, switch the franking system off immediately, but wait until the print
head is sealed, or use the Log off button.
6. Please run a print head test and clean the print head using the Nozzle Cleaning function
should you have the impression that there are lines missing from the franked mark.
7. Always use the functions from the Printer Settings menu. Replacing the print head without
adjusting the alignment and testing from the Printer Settings menu can lead to inade-
quate quality of the franking mark.
The Printer Settings menu gives you access to the options and functions required for perfect print-
ing. The functions in the Printer Settings menu are described in sequence below.
5.6.1. Nozzle test
A franking mark test is incorporated in your Frama Matrix
F10 / F12 franking system.
This test activates each individual nozzle in the printing
head. This enables you to easily locate defective nozzles,
and also to determine the scope of the cleaning pro-
gramme.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info