669065
27
Zoom out
Zoom in
Previous page
1/57
Next page
Frama Matrix F10 / F12
27
Unpack the new ink jet cassette and remove the two protective strips from the
print head.
On the top of the ink jet cassette you will find two grip surfaces. Press them
together between your thumb and forefinger.
Insert the ink jet cassette from above. Follow the contour of the cover as you
do this.
Push the new ink jet cassette fully into its guide.
Release the grip surfaces. Push the ink jet cassette back with one finger to
make sure that the locking tabs are correctly positioned and that the ink jet
cassette is locked into place.
Information
The locking tabs must engage at the side (see photograph). Check that the ink jet cassette is
properly seated before you close the cover again. The cover must close easily without the
need for force.
If you have fitted the new cassette properly, you can now press YES on the screen.
The ink jet cassette will now be tested and calibrated. This process might take a few seconds.
If the ink jet cassette being used has already been fitted in your Frama Matrix F10 / F12 franking
system, you can choose between recalibration and accepting the existing calibration data. Cali-
brate, are you sure?
After calibration, you will be prompted to print a test
franking mark. Take an envelope. We recommend that
you use a filled envelope.
Insert the envelope as for franking. The envelope will be
franked with a test mark.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info