669065
26
Zoom out
Zoom in
Previous page
1/57
Next page
Frama Matrix F10 / F12
26
4.5. Fitting the ink jet cassette
4.5.1. Fitting/changing ink jet cassette
Your Frama Matrix F10 / F12 franking system uses a double ink jet cassette to frank your mail items.
The ink jet cassette also contains the printing head.
You must therefore handle the ink jet cassette very carefully.
Information
1. Do not frank mail items thicker than 10 mm. You risk allowing the printing head to touch
the surface of the mail item and thus smearing the franked mark. You should therefore al-
ways use Frama Matrix F10 / F12 franking labels for thick letters and packets.
2. Make sure that no sharp objects, such as staples, etc., can damage the sensitive surface of
the printing head during franking.
3. Do not use very absorbent or fibrous envelopes which could prevent a cleanly printed
mark. This could invalidate your franking.
4. The use of coloured envelopes which offer insufficient contrast with the franking mark is
not permitted.
5. After a certain time the printing head is sealed to prevent the individual nozzles from dry-
ing. Do not, therefore, switch the franking system off immediately, but wait until the print
head is sealed, or use the Log off button.
6. Please run a print head test and clean the print head using the Nozzle Cleaning function
should you have the impression that there are lines missing from the franked mark.
7. Do not touch the gold contact surfaces in the ink jet cassette. Grease and perspiration on
your skin can leave a film which could results in “messy” print marks.
Please observe the latest installation date (see date printed on ink jet cassette) when you fit your
cassette.
Call up the Change Ink Jet Cassette function:
1. Press i“ in one of the start menus.
2. Press the Printer Settings key
3. Press the Change Cassette key
Open the printer cover and remove the ink jet cassette
(except for first installation) by squeezing the grip surfaces together and pulling the cassette for-
wards out of the machine. Dispose of empty cassettes in accordance with current regulations.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama MATRIX F10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama MATRIX F10 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info