628407
7
Zoom out
Zoom in
Previous page
1/48
Next page
7
box of the telephone line.
• Thecontrolunitmustbeinstalledonthewallinapositionthatmakesiteasytoaccessthe
electric cables, telephone cable, system alarm harness as well as to perform maintenance
on the control unit.
• Donotinstallthecontrolunitanditsmodulesinplaceswithextremetemperaturesand
humidity. For example, don’t place the keypads near heat sources such as radiators
or under direct sunlight, which can affect the liquid crystal display. Place the control
unit and its accessories in a dry room and avoid closing the vent slots which can create a
block, even partially, of internal ventilation.
4.1 Installation of the BUS RS485
The connection is performed by means of 2 conductors plus the ground conductor (negative). It is
recommended to use a shielded cable. The ground is the same used to feed the devices.
Take note that the bus can have parallel branches and shunts, according to the following rules:
• thetotallengthofthebusharness(theadditionofallbranchesandtheirshunts)mustnot
exceed 1500 m.
• inserttwo120ohm1/2Wterminationresistancesonthebus,oneresistancebetweenthe“+”
and “-“ terminals of the control unit and another resistance at the end of the longer pathway.
Minimum cable sections:
Distance from the control unit “BUS+” e “BUS-” conductor Common ground conductor
Up to 400 m 0.22 mm
2
0.22 mm
2
Up to 700 m 0.22 mm
2
0.5 mm
2
From 700 m to 1500 m 0.44 mm
2
0.75 mm
2
See the following example:
120 Ohm resistance
between the BUS+ terminal and
BUS-terminal of the last
peripheral unit.
120 Ohm resistance
between the BUS+ terminal
and BUS- of the control unit
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro CE2N-416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro CE2N-416 in the language / languages: English as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info