779802
19
Zoom out
Zoom in
Previous page
1/28
Next page
EN
PLACING THE RIP FENCE
a. Rip fence (24) Fig.15 can be assembled both on the right side and on the left side of the saw blade (26).
Make it slide on the workbench, and adjust it according to the measurement you need.
b. Push the locking lever (21) Fig.15 downwards to lock the rip fence (24) Fig.15.
c. If the rip fence is not locked enough, turn knob (21) Fig.15 clockwise until the rip fence is correctly blocked.
d. Ensure that rip fence (24) Fig.15 is always parallel to the saw blade (26) Fig.15 .
e. To unlock the rip fence (24) Fig.15, raise the locking lever (21) Fig.15.
WARNING!
To reduce the risk of injuries, always respect the following safety regulations during any kind of
operation:
- use personal safety equipment;
- saw only one piece at a time;
- when cross cutting, always press the workpiece against the workbench;
- do not brake the saw blade by exerting a lateral pressure on it;
- according to your needs, for all kind of works always use:
+ a pusher if the distance between the rip fence and the saw blade is less than or equal to 120 mm;
+ a support surface for long pieces, in case they risk to fall down after being cut;
+ A DUST COLLECTION DEVICE;
+ IF YOU NEED TO CUT A ROUND WORKPIECE, A SUITABLE LOCKING DEVICE, IN
ORDER THAT THE PIECE CANNOT ROTATE CROSSWISE;
+ IF YOU HAVE TO CUT A PLANE WORKPIECE ON ITS ANGLE, A SQUARE EQUIPPED
WITH A SUITABLE STOPS TO PREVENT THE PIECE FROM FALLING DOWN.
Before starting to work, check the perfect conditions of:
- bandsaw saw blade;
- saw blade protection.
If necessary, replace immediately the damaged pieces.
Maintain a correct working position when using the machine (saw blade’s teeth must point towards the
user and downwards).
Do not cut more than one piece at a time. Do not pile the workpieces to cut them. If they get caught by
the blade uncontrollably they may involve risks for the user.
Never cut pieces fastened with ropes, strings, cables or wires, or containing these materials.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fox F28-182A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fox F28-182A in the language / languages: English as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info