779802
9
Zoom out
Zoom in
Previous page
1/28
Next page
EN
ADDITIONAL SAFETY INSTRUCTIONS FOR BANDSAWS
1. ALWAYS DISCONNECT the bandsaw from the socket before any repair, maintenance or cleaning operation
and while changing the saw blade.
2. DO NOT USE the bandsaw until it is not completely assembled or installed according to this instruction manual.
3. START the bandsaw only after removing any object (tools, waste material, etc.) from the workbench.
4. NEVER START the bandsaw when the blade is in contact with the workpiece.
5. ADJUST the upper guide the nearest to the workpiece to be cut.
6. CHECK that saw blade guides and saw blade support bearings are correctly adjusted.
7. ENSURE that saw blade is correctly tightened and set it in order that teeth point downwards.
8. CHECK that size and saw blade type are suitable to the work you must carry out.
9. DO NOT TRY to cut a piece which has not at least one plane surface if you do not have a suitable support.
10. PRESS the piece firmly to the bench and move it forward at a moderate speed.
11. STOP the machine if it rejects the workpiece before it is completely cut.
12. STOP the bandsaw to remove stuck pieces or waste material on the workbench.
13. DO NOT CUT too small pieces that cannot be safely blocked.
14. CARRY OUT lightening cuts on the piece when you must do curved cuts.
15. NEVER CARRY OUT any preparation, assembly or adjustment operations on the workbench when the
bandsaw is switched on.
16. ALWAYS KEEP your hands and fingers far from the blade.
17. ALWAYS WEAR protective goggles.
18. AVOID uncomfortable positions in which your hands risk to slide or get in touch with the blade.
19. DISCONNECT the machine, clean the workbench and lower the upper saw blade protection before leaving
from the machine. In case of long periods of inactivity loosen saw blade’s tension.
20. REPLACE missing or damaged parts. Do not use the bandsaw if its parts do not perfectly work.
21. REGULARLY CHECK if the supply cable is damaged, in that case get it repaired by an authorised after-sales
centre. Check regularly the extension cables and replace them if they are damaged.
ENVIRONMENTAL PROTECTION
INFORMATION FOR USERS
Implementation of Directives 2011/65/UE, 2012/19/UE, relative to reducing the use of hazardous substances in
electric and electronic appliances and the disposal of waste”, please take note of the following:
The crossed out wheelie bin symbol found on the appliance or the packaging indicates that the product must be
disposed separately from ordinary household waste when it reaches the end of its working life.
The user must consign the unwanted appliance to an authorised waste disposal centre for electric and electronic
goods, or alternatively, hand it over to the relative dealer at the moment of purchasing a new appliance of the
same type on a basis of a one to one ratio.
Differentiated disposal to enable possible recycling or environmentally compatible elimination of the appliance,
helps to limit undesirable effects on health and environment and promotes the reuse and/or recycling of the
materials that compose the appliance.
WARNING!
IN ACCORDANCE WITH THE RELATIVE LEGISLATION IN FORCE IN THE COUNTRY OF
USE, SANCTIONS WILL BE IMPOSED ON THE USER IF THE APPLIANCE IS DISPOSED OF
ILLEGALLY.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fox F28-182A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fox F28-182A in the language / languages: English as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info