779802
8
Zoom out
Zoom in
Previous page
1/28
Next page
EN
GENERAL SAFETY INSTRUCTIONS
1. Keep the work surface clean. If the work area or surface is busy the probability of injuries is higher.
2. Do not use the machine in dangerous environment conditions. In order to prevent electric shock, do not
expose the tools to rain and do not use it in a damp area. Keep the work area illuminated. Do not use the
machine near gas or inflammable substances.
3. Connect the dust collection device. If the machine is equipped with a dust collection device, make sure that
this system is connected and correctly used.
4. Keep unknown persons and children away from the machine. All unknown persons and children must keep a
safe distance from the work area.
5. Protect yourself from electric shock. Avoid any contact with earthing surfaces.
6. Handle the power supply cable with care. Do not pull the electric cable to disconnect it from the plug. Keep
the electric cable away from heat, oil and sharp edges.
7. Use extension cables designed for outdoor use. When using the machine outdoors, use only extension cables
suitable for outdoor use, having specific indications.
8. Be vigilant. Check carefully what you are doing, have good sense. Do not use the machine if you are tired.
9. Do not use the machine if you have taken medicines, alcohol, drugs.
10. Avoid accidental starts. Be sure that the switch is on the OFF position before inserting the plug into the socket.
11. Wear suitable clothing. Do not wear loose-sleeved garments or pieces of jewellery which may get caught in
the moving parts. For outdoor use we recommend non-slip shoes. If necessary, use headgear to cover hair.
12. Always use personal protection devices: wear protective goggles and masks in case dust or sawdust is
produced. Wear ear muffs or plugs in noisy areas. Wear gloves when handling parts with sharp edges.
13. Do not be off balance over the machine. Always keep firmly stand
14. Ask for advices to skilled and qualified people if you are not familiar with using such a machine.
15. Move away from the workbench the tools you do not use. If you do not use the tools, you must arrange them
in a dry area which is locked and away from the reach of children.
16. Do not force the machine. You can obtain better and safer results if you use the machine at the cutting pressure
for which it has been designed.
17. Use the suitable tool for the work you are processing. Do not use a small tool for an intensive job.
18. Block the piece. If possible, use C-clamps or a holder to fix the piece. It is safer than using only your hands.
19. Keep the tools in perfect conditions. Keep the tools sharp and clean to obtain better and safer results. Follow
the instructions to grease and change the accessories. Check regularly the electric cable and replace it if it is
damaged. Keep the handles and the handgrips dry, clean, unoiled and ungreased.
20. Disconnect the tool from electricity if you do not use it, before maintenance and substitution of the accessories
or tools such as blades, drills, mills, etc.
21. Move away from the workbench locking and adjustment wrenches. Get used to check if the locking and
adjustment wrenches have been removed before switching it on.
22. Check the parts of the tool to verify that there are not any damaged components. Before using the machine,
check if safety devices or any other parts are damaged in order to be sure that it works properly and that it can
accomplish the task for which it has been designed. Check that moving parts are aligned, do not stop and are
not broken. Check the assembly and any other condition that can influence the functioning of the machine. Any
damaged part or protection must be repaired or replaced by an authorised after sales centre. Do not use the
machine if the switch does not work properly.
23. Use the machine, the tools and the accessories in the way and for the purposes mentioned in this manual.
Different uses and parts can cause possible risks to the user.
24. The machine must be repaired by a qualified person. This electric tool is in compliance with local safety
regulations. The machine must be repaired only by qualified people who use original spareparts, otherwise risks
may arise for the user.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fox F28-182A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fox F28-182A in the language / languages: English as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info