IPCAM supports 16 preset positions, which is considered enough for DIY home & small business surveillance
market
The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions.
Add Click this icon to save the position you need the camera to remember
Delete Select one preset position and click this button to delete it.
GO Select one preset position in the preset dropdown list and click Go to make the camera move the
preset position
How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position.
Secondly, click button and enter a descriptive name for the preset position. The preset position cannot
contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset
dropdown list, and click go button, the camera will go to the preset position.
Section 6 Guard Position(Only FI9828P)
After setting the guard position, your camcorder will automatically return to the guard position within a
predetermined time (manually setting) when it stops moving (manually or cruise). You could refer to the
following method in chapter 4.7.4 ( Guard Position Settings).
Section 7 IR LED Lights
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Scheduled control. When it is selected, the function of switching on/off the infrared lamp as
scheduled is enabled (Settings> Video > IR LED Schedule ).
Section 8 Image quality settings
