516812
10
Zoom out
Zoom in
Previous page
1/48
Next page
WWW.FOSCAM.COM FI8910W User Manual
Figure 2.4
Obtain IP from DHCP server: If checked, the device will obtain its IP from the DHCP server. In
other words, the camera will have a dynamic IP. (Make sure the Router to which the camera
connects has DHCP enabled).
Figure 2.5
IP Address: Fill in the IP address assigned.
Subnet Mask: Fill in the Subnet Mask of your network, normally this is: 255.255.255.0.You can
find the network subnet mask from your router or from your locally attached PC.
Gateway: Fill in the Gateway address. The gateway is normally your router’s LAN IP. You can
find the Gateway address from your locally attached PC.
DNS Server: Fill in the DNS address. It is recommended that you use the address from your
locally attached PC, which is normally your router’s LAN IP.
Http Port: The default port for HTTP is 80. Only change this if you understand the implications of
doing so.
NOTE: If the prompt “Subnet doesn’t match, dbclick to change!” appears, please enable
DHCP and choose obtain IP from DHCP server or reconfigure the camera again.
This section only details the most typical settings and how to configure wired connections during
installation. Other network configurations are broadly similar, although the specific parameters
that you must configure are necessarily different. A full description of all configurations or
configuring advanced IP solutions is beyond the scope of this manual.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8910W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8910W in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8910W

Foscam FI8910W User Manual - German - 15 pages

Foscam FI8910W Quick start guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info