516812
8
Zoom out
Zoom in
Previous page
1/48
Next page
WWW.FOSCAM.COM FI8910W User Manual
CAUTION: Make sure that only the power adapter supplied with your IPCAM is used. Using
a non-approved power adapter may damage the camera.
4 Turn on the power, the power light on the power adapter will be visible.
5 When the camera is powered up, If the network cable is plugged in correctly, the small green
light on the camera network socket will turn on, and the small yellow light will flash. The
network light will blink, about 1~2 times per second.
6 The camera takes approximately 30 seconds to start up before it displays an IP address on
the IP Camera Tool (details: 2.1
).
2 SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been connected properly, you can double click the icon “IP Camera Tool”
and a dialog box as Figure 2.1 will pop up.
Figure 2.1
The software searches for IPCAMs automatically over the LAN.
There are 3 possible results:
1. No Cameras are found on the LAN. After about 1 minute of searching, the Result Field will
show “not found IP Server” and the program shut off automatically.
2. IP Cameras have been found within LAN. All the found IP Cameras will be listed and the
total number displayed in the result field as shown in Figure 2.1.
3. IP Cameras installed within the LAN do not share the same subnet with the monitoring
PC. A prompt is displayed with a “Subnet doesn’t match, dbclick to change!” message. Use
the left mouse button to select the prompt and then right click the mouse for available options,
choose Network Configuration to set the IP address of the Camera to the same subnet as the
LAN. (Figure 2.5) You can choose to obtain an IP from the DHCP server or set a static IP for the
camera. (Figure 2.4)
NOTE: If your camera is not displayed within the IP camera tool list, check if DHCP is enabled on
your router, and that the router MAC address filtering is not blocking your camera. Also make
sure that any firewall isn’t blocking the camera.
Six Options
Choose the IP Camera list and right click; there are six options, Basic Properties, Network
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8910W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8910W in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8910W

Foscam FI8910W User Manual - German - 15 pages

Foscam FI8910W Quick start guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info