548566
21
Zoom out
Zoom in
Previous page
1/30
Next page
IPCAM User Manual
- 19 -
Figure 3.3
1) Use Network cable connect IP Camera to the LAN.
2) Enter IP Camera Tool to set the basic configuration.(details: 2.1 )
3) login the Camera homepage as Administration.
4) Enter DDNS Settings Page and ennable DDNS service .Click <Submit> and the device will reboot.
(details: 2.5.3)
5) You can access the Camera from Internet by domain name.
Static IP user
Static IP user is not need to use DDNS for remote access. When finished the setting of the IP Camera
in LAN,you can access the Camera directly from Internet by the WAN IP.You can obtain the WAN IP
by two ways.
Obtain the WAN IP from some Website
You can discover this easily by opening on a computer using the same connection as the IP camera
and entering this address: http://www.whatismyip.com.The page at this address will show you the
current WAN IP.
Figure 3.4
Obtain the WAN IP address from the router
Take the WRT54G router of LINKSYS for example,
1) Obtain the IP address of the router(LAN gateway address),user name and password for logon
to the router from the network administrator,
2) Enter the LAN IP address of the router(LINKSYS WRT54G default:192.168.1.1) in the address
bar of the IE to log on to the router;Open the Status page to find out the WAN address of the
router.In this example,the address is 116.25.51.115.
Access the IP Camera from the Internet
User can access the IP Camera from the Internet,Enter WAN IP address + port number in the IE to
access IP Camera.For example, Http:// 116.25.51.115:85
Note: Make sure the Port mapping is success.You can do port mapping by two ways:
Enter setting page of the router which ipcamera connect with to enable UPNP function.Enter
ipcamera Upnp Settings to enable UPNP and make sure the state is Upnp success.
If your router has the Virtual Map function.Enter router setting page,add ipcameras IP and
port to the Virtual map list.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foscam FI8909 NA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foscam FI8909 NA in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Foscam FI8909 NA

Foscam FI8909 NA Quick start guide - Dutch - 15 pages

Foscam FI8909 NA User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info