624403

Focusrite Scarlett 18i20 Manual

11
Zoom out
Zoom in
Previous page
1/37
Next page
11
Rear Panel
568 7
12349
1. MIC/LINE INPUTS 3 to 8 - Combo type input sockets - connect further microphones or line
level signals via XLR or ¼” (6.35 mm) jacks as appropriate. Either ¼” TRS (balanced) or TS
(unbalanced) jack plugs can be used for line level signals.
2. LINE OUTPUTS 3 to 10 – eight balanced analogue line outputs on ¼” (6.35 mm) jack sockets;
use TRS jacks for a balanced connection or TS jacks for unbalanced. The signals available
at these outputs are defined in Scarlett MixControl, and can typically be used for driving
alternative speakers (i.e., midfield, nearfield, etc.), the additional speakers in a multichannel
monitoring system, or to drive outboard FX processors.
3. MONITOR 1 and 2 – two balanced analogue line outputs on ¼” (6.35 mm) jack sockets; use
TRS jacks for a balanced connection or TS jacks for unbalanced. These are also Line Outputs
1 and 2 of the system, and will generally be used for driving the main L and R speakers of your
monitoring system. However, the signals at the outputs may be defined in Scarlett MixControl.
4. OPTICAL IN and OUT – two TOSLINK connectors, each carrying eight channels of digital audio
in ADAT format at 44.1/48 kHz sample rate or four channels at 88.2/96 kHz. These are simply
additional inputs and outputs (respectively) to/from the Scarlett 18i20.
5. WORD CLOCK OUT – a BNC connector carrying the Scarlett 18i20’s word clock; this may be
used to synchronise other digital audio equipment forming part of the recording system. The
source of sample clock synchronisation used by the Scarlett 18i20 is selected in Scarlett
MixControl.
6. USB 2.0 port – Type B connector; connect the Scarlett 18i20 to your computer with the cable
supplied.
7. MIDI IN and MIDI OUT – standard 5-pin DIN sockets for connection of external MIDI equipment.
The Scarlett 18i20 acts as a “Break-out (and Break-in) Box”, allowing MIDI data to/from your
computer to be distributed to additional MIDI devices.
8. SPDIF IN and OUT – two phono (RCA) sockets carrying two-channel digital audio signals in
or out of the Scarlett 18i20 in S/PDIF format. Like all the other inputs and outputs, signals at
these connectors may be routed in Scarlett MixControl.
9. AC mains – standard IEC receptacle.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Scarlett 18i20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Scarlett 18i20 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Scarlett 18i20

Focusrite Scarlett 18i20 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info