624403
9
Zoom out
Zoom in
Previous page
1/37
Next page
9
HARDWARE FEATURES
Front Panel
4 5 4 5 8 9 13 1414 11
1 2 7 103 126
The front panel includes all the input gain and monitoring controls as well as two of the input
connectors for Mic, Line and Instrument signals.
1. MIC-LINE-INST 01 & 02 Combo type input sockets - connect microphones, instruments
(e.g., guitar), or line level signals via XLR or ¼” (6.35 mm) jacks as appropriate. Either ¼” TRS
(balanced) or TS (unbalanced) jack plugs can be used for instruments or line level signals.
2. MIC 48V two switches enabling 48 V phantom power at the XLR contacts of the Combo
connectors for mic inputs 1-4 and 5-8 respectively. (Note that inputs 3 to 8 are on the rear
panel.) The switches each have an associated red LED indicating that phantom power is
selected.
3. GAIN 01 and GAIN 02 - adjust the input gain for the signals at Inputs 1 and 2 respectively.
4. INST two switches changing the input configuration for the jack contacts at inputs 1 and
2. When INST is selected, the gain range and input impedance are altered (relative to LINE),
and the input is made unbalanced. This optimises it for the direct connection of instruments
(usually via a 2-pole (TS) jack plug). When INST is off, the inputs are suitable for the connection
of line level signals. Line level signals may be connected either in balanced form via a 3-pole
(TRS) jack or unbalanced, via a 2-pole (TS) jack. The switches each have an associated red
LED indicating that INST is selected.
5. PAD two switches which insert a 10 dB pad in the signal paths of Inputs 1 and 2. With the pad
applied, the maximum input signal level is +16 dBu. The switches each have an associated red
LED indicating that PAD is selected.
6. GAIN 03 to GAIN 08adjust the input gain for the signals at Inputs 3 to 8 respectively. (Note
that inputs 3 to 8 are on the rear panel.)
7. Input meters eight 5-segment LED bargraph meters indicating the signal levels of the eight
analogue input signals. The meters show signal level after the input gain stage, and thus
their indication is affected by the gain controls. The LEDs illuminate at -42 (green, “signal
present”), -18 (green), -6 (green), -3 (yellow) and 0 dBFS (red). A level of 0 dBFS implies digital
clipping, and should always be avoided.
8. USB ACTIVE – a green LED which illuminates when the unit is recognised by the computer to
which it is connected.
9. LOCKED a green LED which confirms word clock synchronisation, either to the Scarlett’s
18i20’s internal clock or to an external digital input.
10. VOLUME MONITOR - main monitor output level control this control will normally control
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Scarlett 18i20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Scarlett 18i20 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Scarlett 18i20

Focusrite Scarlett 18i20 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info