624376
9
Zoom out
Zoom in
Previous page
1/29
Next page
9
You’ll see that as you change the source selection for an output, the right hand side of the window
displays a graphic illustrating the routing. For simple one-to-one routings, the graphic looks like
this:
4. Fader – use this to adjust the signal level at the output. Note that all output levels are set to
maximum as a default (unity gain). If the fader “knob” is green, it means that control of the
output level is assigned to the physical MONITOR control on the Clarett’s front panel. This
assignment is made on the Device Settings page; see page 27.
5. MUTE – click this button to mute/unmute the output.
6. STEREO – assigns the output to be either one of a stereo pair or an individual mono output. In
stereo mode, all output functions apply to both outputs forming the stereo pair.
7. Meters – A bargraph meter (two if configured for Stereo operation) is provided indicating the
audio level at the output. A red audio overload icon appears when the output level clips. This
icon can be cleared by clicking anywhere in the meter bar.
As well as all the functions above, the Monitor Outputs also have one additional control, a DIM button.
When active, Dim reduces the level in the monitors (the amount of reduction is determined by the
Clarett device connected).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Focusrite Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Focusrite Control in the language / languages: English as an attachment in your email.

The manual is 5,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Focusrite Control

Focusrite Control User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info