Manual Flymo Easi Glide 300 (page 9 of 80) (All languages)

631018

Zoom out

Zoom in

1/80

ENGLISH - 2

Safety Precautions

11. Switch on the motor according to instructions and

with feet well away from the blade(s).

12. Do not put hands or feet near or under rotating parts.

13. Do not tilt product when the motor is running, except

when starting and stopping. In this case, do not tilt

more than absolutely necessary and lift only the part

hich is away from the operator. Always ensure that

both hands are in the operating position before

returning the appliance to the ground.

14. Do not put hands near the grass discharge chute.

15. Never pick up or carry a product when it is operating

or still connected to the mains supply.

16. Remove the plug from the mains :

- before touching the blade (ensure the blade has

come to a complete stop);

- before leaving the product unattended for any period;

- before clearing a blockage;

- before checking, cleaning or working on the appliance;

- if you hit an object. Do not use your product until you

are sure that the entire product is in a safe

operating condition.;

- if the product starts to vibrate abnormally. Check

immediately. Excessive vibration can cause injury.

Maintenance and storage

1. Caution: Do not touch rotating blade(s)

2. Keep all nuts, bolts and screws tight to be sure the

product is in safe working condition.

3. Check the grassbox frequently for wear or deterioration.

. Replace worn or damaged parts for safety.

5. Only use the replacement blade and blade bolt

specified for this product.

6. Be careful during adjustment of the product to

prevent entrapment of the fingers between moving

blades and fixed parts of the machine.

7. Renew your metal blade after 50 hours mowing or 2

years whichever is the sooner - regardless of condition.

8. If, during the life of the product, the belt begins to slip,

return the product to an Authorised Service Dealer for

maintenance.

9. Store in a cool dry place and out of reach of children.

Do not store outdoors.

10. Allow the product to cool for atleast 30 minutes

before storing.

Guarantee and Guarantee Policy

If any part is found to be defective due to faulty manufacture

within the guarantee period, Husqvarna Ltd., through its

Authorised Service Repairers will effect the repair or

replacement to the customer free of charge providing:

(a) The fault is reported directly to the Authorised Repairer.

(b) Proof of purchase is provided.

adjustment by the user.

(d) The failure has not occurred through fair wear and tear.

(e) The machine has not been serviced or repaired,

taken apart or tampered with by any person not

authorised by Husqvarna Ltd..

(f) The machine has not been used for hire.

(g) The machine is owned by the original purchaser.

(h) The machine has not been used commercially.

* This guarantee is additional to, and in no way

diminishes the customers statutory rights.

Failures due to the following are not covered, therefore it

is important that you read the instructions contained in

this Operator's Manual and understand how to operate

and maintain your machine:

Failures not covered by guarantee

* Failures as a result of not reporting an initial fault.

* Failures as a result of sudden impact.

* Failures as a result of not using the product in

accordance with the instructions and

recommendations contained in this Operator's

Manual.

* Machines used for hire are not covered by this

guarantee.

* The following items listed are considered as wearing

parts and their life is dependent on regular

maintenance and are, therefore not normally subject

to a valid warranty claim: Blades, Electric Mains cable

Caution!

Husqvarna Ltd. does not accept liability under the

warranty for defects caused in whole or part, directly

or indirectly by the fitting of replacement parts or

additional parts that are not either manufactured or

approved by Husqvarna Ltd., or by the machine

having been modified in any way.

Environmental Information

Husqvarna Ltd products are manufactured under an

Environmental Management System (ISO 14001) using,

where practical, components manufactured in the most

environmentally responsible manner, according to

company procedures, and with the potential for recycling

at the end of the products’ life.

• Packaging is recyclable and plastic components have

been labelled (where practical) for categorised

recycling.

• Awareness of the environment must be considered

when disposing of ‘end-of-life’ product.

• If necessary, contact your local authority for disposal

information.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. For more

detailed information about recycling of this product,

please contact your local council office, your household

waste disposal service or the shop where you purchased

the product.

Service Recomendations

•

Your product is uniquely identified by a silver and black product rating label.

• We strongly recommend that your product is serviced at least every twelve months, more often in a

professional application.

To ensure you have a secure connection between the lawn-

mower and the extension cable we strongly recommend

you use the following method of attaching the cable:

1. Plug the short connection lead into the socket of the

extension cable.

(G1).

2. Form a loop in the end of the extension cable near to

the socket and secure this in the strain

relief feature at the top of the switchbox.

(G2)

This will cause the socket to hang in a downward

direction.

(G3)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flymo Easi Glide 300 in the language / languages: All languages as an attachment in your email.

The manual is 5,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flymo Easi Glide 300 Manual

Product: