631059
25
Zoom out
Zoom in
Previous page
1/70
Next page
English - 25
3. INSTALLATION
Laying the boundary wire
If you intend to staple down the boundary wire:
Cut the grass very low with a standard
lawnmower or a trimmer where the wire is to be
laid. It will then be easier to lay the wire close to
the ground and the risk of the robotic lawnmower
cutting the wire or damaging the insulation of the
wire is reduced.
Make sure to lay the boundary wire close to the
ground and secure the staples close together
approximately 75 cm apart. The cable must lie
close to the ground so as not to be cut before the
grass roots have grown over it.
Use a hammer to knock the staples into the
ground. Exercise care when knocking in the
staples and make sure the wire is not under strain.
Avoid sharp bends in the wire.
If the boundary wire is to be buried:
Make sure to lay the boundary wire at least 1 cm
and a maximum of 20 cm in the ground. The wire
can be buried for instance using an edge cutter or
a straight spade.
Use the supplied measurement gauge as a guide
when you lay out the boundary wire. This helps you
to easily set the correct distance between the
boundary wire and the boundary/obstacle. The
measurement gauge is broken loose from the box.
Loop for connecting the guide wire
To facilitate the connection of the guide wire to the
boundary wire, it is recommended to create a loop
with about 20 cm of extra boundary wire at the point
where the guide wire will later be connected. It is a
good idea to plan where the guide wire will be placed
before laying out the boundary wire. See
3.6 Installation of the guide wire on page 28.
IMPORTANT INFORMATION
Extra wire must not be placed in coils outside
the boundary wire. This can disrupt the
robotic lawnmower.
25


Need help? Post your question in this forum.

Forumrules
1

Forum

flymo-1200r---2013

Reset search

  • I have had a lot of trouble with my 1200R this year. I now have a flashing green light and it isn’t charging. I think it might need a new battery but I thought I would ask the question before changing the battery. My emails to Flymo go unanswered!!! Irene Submitted on 2-6-2022 at 19:43

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo 1200R - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo 1200R - 2013 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flymo 1200R - 2013

Flymo 1200R - 2013 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info