Manual Flymo 1200R - 2013 (page 23 of 70) (English)

631059

Zoom out

Zoom in

1/70

English - 23

3. INSTALLATION

Boundaries within the working area

Use the boundary wire to demarcate areas inside the

working area by creating islands around obstacles

which cannot withstand a collision, for example,

flowerbeds, bushes and fountains.

Obstacles that can withstand a collision, for example,

trees and bushes higher than 15 cm, do not need to

be demarcated by the boundary wire. The robotic

lawnmower will turn around when it collides with this

type of obstacle.

To achieve careful and silent operation, it is

recommended to isolate all fixed objects in and

around the working area.

Lay the wire up to and around the area to be

demarcated, and then return it back along the same

route. If staples are used, the wire should be laid

under the same staple on the return route. When the

boundary wires to and from the island are laid close

together, the robotic lawnmower can drive over the

wire.

The boundary wire may not be crossed on its way to

and from an island.

Obstacles that slope slightly, for example, stones or

large trees with raised roots, must be isolated with an

island or removed. Otherwise the robotic lawnmower

can slide up onto this kind of obstacle causing the

blades to be damaged and/or the mower to get stuck.

Secondary areas

If the working area consists of two areas which the

robotic lawnmower has difficulty travelling between, it

is recommended to set up a secondary area.

Instances of this are 25% slopes or a passage that is

narrower than 150 cm. Lay the boundary wire then

around the secondary area so that it forms an island

outside of the main area.

The robotic lawnmower must be moved manually

between the main and secondary area when the lawn

in the secondary area has to be cut. The MAN

operation mode must be used as the robotic

lawnmower cannot travel on its own from the

secondary area to the charging station. See

5.1 Operation selection on page 39. In this mode,

the robotic lawnmower will never look for the

charging station but will mow until the battery runs

out. When the battery is flat, the robotic lawnmower

will stop and the Needs manual charging message

will appear in the display. Then place the robotic

lawnmower in the charging station to charge the

battery. If the main working area has to be cut after

charging, it is appropriate to switch the operation

mode to Auto before placing the robotic lawnmower

in the charging station.

Secondary

area

Main area

I have had a lot of trouble with my 1200R this year. I now have a flashing green light and it isn’t charging. I think it might need a new battery but I thought I would ask the question before changing the battery. My emails to Flymo go unanswered!!! Irene Submitted on 2-6-2022 at 19:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flymo 1200R - 2013 in the language / languages: English as an attachment in your email.

The manual is 10,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flymo 1200R - 2013

Flymo 1200R - 2013 Quick start guide - English - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flymo 1200R - 2013 Manual

Product: