780034
162
Zoom out
Zoom in
Previous page
1/224
Next page
160 161
Please do not touch the brake disc while
it is rotating. You can suffer serious inju-
ries if your nger is caught in the gaps of
a rotating disc brake.
The brake calliper and disc may get hot
during braking. You could suffer burns if
you touch this part during or directly after
braking.
Have the brake disc replaced if it is worn out or
bent. This replacement procedure must be car-
ried out by a FLYER specialist retailer.
Hydraulic brakes
It is possible that brake uid may escape from
the system due to leaky cables and connections.
This can negatively impact the effectiveness of
the brakes. Check the pipes and connections for
tightness before each ride.
Do not ride with your FLYER if uid is leaking from
the braking system. Allow a FLYER specialist re-
tailer to undertake repair work on this part imme-
diately. The danger of your brakes failing in this
condition is very high.
Formation of air bubbles in the disk
brakes
You can avoid this problem by applying
the brake lever before transport and then
xing it in this position using a strap.
This prevents any air from entering the
hydraulic system. Please note that the
brake lever may not be pulled when the
wheel has been removed. Place a spac-
er between the brake blocks if you need
to remove the wheel.
Ask for detailed instructions regarding the oper-
ation and special features of the e-bike braking
system from your FLYER specialist retailer, even
if you are an experienced cyclist. Practise in a qui-
et, safe area with no trafc.
If you have any questions about assembling, set-
ting up, servicing or operating this part of your
bike, please contact a FLYER specialist retailer.
A trigger point should be clearly noticea-
ble after approximately a third of the way
when pulling the brake lever. Do not start
to ride if the brake lever can be pulled up
to the handlebars. In this case, the
FLYER is not safe for operation. It is
then essential to visit your FLYER spe-
cialist retailer and have the brake adjust-
ed or repaired.
Brake discs and brake pads are particu-
larly subject to wear. Have these safe-
ty-related components regularly checked
for wear and changed as required by
your FLYER specialist retailer.
If the brake system needs to be cleaned, contact
your FLYER specialist retailer. The component
manufacturer's instructions on how to clean the
brake system are provided in the respective brake
system manual.
Only allow your FLYER specialist retailer to
maintain the brake system and change individual
brake system components. Only original spare
parts may be used. Otherwise it is possible that
the functionality of your FLYER e-bike may be im-
pacted or damaged.
Have the brake pads regularly checked accord-
ing to manufacturer specications by your FLYER
specialist retailer.
It is essential to switch off the electrical
operating system and remove the bat-
tery before any form of maintenance
work is carried out.
Source: Shimano®
techdocs
Switch off the operating system
1
Source: Shimano® techdocs
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Tour - Panasonic 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Panasonic 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info