780034
155
Zoom out
Zoom in
Previous page
1/224
Next page
152 153
EN
You can then remove the
front wheel according to
the steps listed above.
The following applies for rear wheels:
If your bicycle uses a derailleur gear system,
change gear to the smallest sprocket. In this
position, the rear derailleur poses the least hin-
drance in removing the wheel.
If your bicycle has quick-release levers or ax-
les, open them.
If your bicycle has hexagonal bolts, then loos-
en them in anti-clockwise direction with a tting
ring spanner or box-end wrench.
Pull the rear derailleur backwards somewhat.
Lift the bicycle slightly.
Lightly strike the wheel from above with the
palm of the hand.
Take the wheel out of the frame.
If your bicycle has a gear hub, please consult the
instructions supplied by your manufacturer for re-
moving the wheel.
The valve to your FLYER e-bike’s inner tube
3. Removing the tyre and inner tube
Unscrew the valve cap, the fastening nut and
possibly the cap nut from the valve.
Release all of the remaining air from the inner
tube.
Insert the tyre lever opposite the valve on the
inside of the tyre.
Insert the second tyre lever approx. 10 cm from
the rst, between the rim and tyre. Lift the tyre
wall over the edge of the rim.
Repeat this lifting action around the wheel until
the entire tyre is free.
Remove the inner tube from the tyre.
Schrader valve
4. Change the inner tube
Switch the inner tube for an intact one.
Tubular tires and tubeless tires must be
changed according to the tires and rims’
manufacturer’s instructions.
5. Reassembling the tyre and inner tube
Please avoid allowing foreign bodies in-
side the tyre. Ensure that the inner tube
does not have any folds and is not
squashed.
Ensure that the rim tape covers all spoke
nipples and does not have any damage.
Place one edge of the rim into the tyre.
Push one side of the tyre completely into the
rim.
Insert the valve through the valve hole in the
rim and put the inner tube into the tyre.
Pull the second side of the tyre into the rim with
the balls of your hands.
Ensure that the inner tube is correctly posi-
tioned.
Pump the inner tube up somewhat.
Check that the tyre is properly in place and
runs true using the control ring on the side of
the tyre. Adjust the positioning of the tyre with
your hand if it does not quite run true.
Pump the inner tube up to the recommended
tyre pressure.
Please take note of the running direction
of the tyre when installing it.
6. Reattaching the wheel
Reattach the wheel securely back in the frame or
fork with the corresponding quick release, bolted
connection or full oating axle mechanism.
If your bicycle has disc brakes, please
ensure that the brake discs are correctly
secured between the brake pads!
Source: Shimano® techdocs
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Tour - Panasonic 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Panasonic 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info