Manual Flyer Tour - Panasonic 2018 (page 154 of 224) (English, German, Dutch, French, Italian)

780034

154

Zoom out

Zoom in

1/224

152 153

12.2 Tyres and inner tubes

Tyres, like many other parts, are subject

to wear and tear. Check the prole

depth, tyre pressure and state of the lat-

eral tyre surfaces at regular intervals

and take note of signs of brittleness or

wear.

Do not exceed the maximum tyre pres-

sure recommended when inating the

tyres. Otherwise this could lead to a tyre

exploding.

The tyres must be pumped up with at

least the stated minimum tyre pressure.

The tyre might detach from the rim if the

tyre pressure is too low.

The values for the permitted maximum

and minimum pressure are imprinted on

the lateral tyre surface.

Tyres may only be changed for identi-

cal, original tyres. The bicycle’s handling

could otherwise be negatively affected.

This may lead to accidents.

You should only replace damaged parts

with original spare parts.

Most FLYERS use car-type

valves or Schrader valves. This

valve type allows you to top

up the tyre pressure of your

FLYER e-bike at most lling

stations. Specialist retailers will

let you know which type of air

pump ts your car-type valves.

Tubes may only be changed for

identical, original tubes.

12.3 Dealing with a at tyre

Correct and safe repair of a at tyre requires

specialised e-bike knowledge and special tools.

Have technical defects and at tyres exclusively

repaired by your FLYER specialist retailer.

Repairing a tire puncture involves having

to adjust safety-relevant components.

Incorrect mounting of the wheels and

brakes can lead to severe falls and inju-

ries. We strongly advise you not to repair

a tire puncture alone. Ask your FLYER

retailer to x the tire puncture for you.

Schrader or car-type valve

Get thorough instructions from your

FLYER specialist dealer and practise

changing the wheels and tyres under

their supervision if you plan to repair

your own at tyres. The system must be

switched off and the battery must be re-

moved before changing a tyre or wheel.

You need the following equipment to repair a tire

puncture:

• Plastic tire lever

• Patches

• Rubber cement

• Sandpaper

• Open-ended spanner or wrench (for wheels

without quick release skewers)

• Air pump

• Spare tube

If your FLYER is equipped with a rim brake as a

V-brake, proceed to open the brakes as follows:

• Hold the wheel with one hand.

• Press the brake arms together against the rim

• Hang the bowden cable of the brake or the out-

er sheath of the bowden cable over one of the

brake arms

When removing the front and rear wheel,

make sure the pull cable is loosened.

If your bike is equipped with hydraulic rim

brakes, proceed to remove the brakes as follows:

• If you have quick releases for the brakes, you

can demount a brake unit according as in-

structed in manufacturer’s instructions. (See

also p. 156)

• If you do not have a brake quick release, de-

ate all of the air out of the tyre.

If your FLYER is equipped with a disc brake, you

can remove the wheel without further preparation.

Please note: when tting the wheel, the disk must

be slotted between the brake linings of the brake

calliper and ultimately be centred without contact.

In the case of back pedal brakes, the screws

on the brake arm of the chain stay have to be

opened.

2. Removing the Wheel

• If your bicycle has quick-release levers or ax-

les, open them.

• If your bicycle has hexagonal bolts, then loos-

en them in anti-clockwise direction with a tting

ring spanner or box-end wrench.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Panasonic 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Tour - Panasonic 2018 Manual

Product: