733023

Flyer Tour - Bosch 2018 Manual

168
Zoom out
Zoom in
Previous page
1/224
Next page
166 167
14. Bicycle chain/
drive belt
Bicycle chain maintenance
Bicycle chains are wearing parts. The degree of
wear varies considerably. Have the chain of your
FLYER regularly checked by your FLYER special
-
ist retailer.
• Hub gears: approx. 3000 km
• Chain gears: 1500-2000 km
A worn bike chain/drive belt can break
and cause very serious falls. Worn bicy
-
cle chains must therefore immediately
be changed by your FLYER specialist
retailer.
If the chain/belt drive of your FLYER e-
bike has fallen off the chain ring or
sprocket, it is essential to switch off the
electrical system and remove the battery
before placing the chain back on the
gear wheels.
The chain/belt drive may only be tight-
ened once the electrical system has
been switched off and the battery has
been removed.
Regularly care for your bicycle chain by cleaning
and greasing it. These measures reduce prema
-
ture wear.
To ensure that the chain and gears can
work safely, the chain must have a cer
-
tain level of tension. Chain gear systems
tense the chain automatically. In the
case of hub gears, chains which are too
loose must be tightened. It might other
-
wise jump off the gears and lead to a fall.
Tightening the chain or drive belt
Loosen the screws A1 on both sides of the drop
-
out. You only need to loosen the screws until the
dropout can move freely.
A1
Tighten the chain/drive belt using the adjusting
screw A2. The correct chain tension is reached
when the chain can still move up and down slight
-
ly in the centre (10-15 mm). The correct belt ten-
sion must be checked using a belt tension meas-
uring device. Consult the belt manufacturer’s
instructions to determine the correct tension.
www.gatescarbondrive.com/Tech/Resources
A2
e tension has been set correctly, tighten the
screws A1 with the prescribed torque of 8 Nm.
Check that the dropout and the rear wheel are
rmly in place.
A1
… 168 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Tour - Bosch 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Tour - Bosch 2018 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info