Manual Flyer RS serie - Panasonic (page 153 of 275) (English, German, Dutch, French, Italian, Norwegian)

732994

153

Zoom out

Zoom in

1/275

151

You can then remove the

front wheel according to

the steps listed above.

The following applies for rear wheels:

• If your bicycle uses a derailleur gear system,

change gear to the smallest sprocket. In this

position, the rear derailleur poses the least hin

drance in removing the wheel.

• If your bicycle has quick-release levers or ax

les, open them.

• If your bicycle has hexagonal bolts, then loos

en them in anti-clockwise direction with a tting

ring spanner or box-end wrench.

• Pull the rear derailleur backwards somewhat.

• Lift the bicycle slightly.

• Lightly strike the wheel from above with the

palm of the hand.

• Take the wheel out of the frame.

If your bicycle has a gear hub, please consult the

instructions supplied by your manufacturer for re

moving the wheel.

The valve to your FLYER e-bike’s inner tube

3. Removing the tyre and inner tube

• Unscrew the valve cap, the fastening nut and

possibly the cap nut from the valve.

• Release all of the remaining air from the inner

tube.

• Insert the tyre lever opposite the valve on the

inside of the tyre.

• Insert the second tyre lever approx. 10 cm from

the rst, between the rim and tyre. Lift the tyre

wall over the edge of the rim.

• Repeat this lifting action around the wheel until

the entire tyre is free.

• Remove the inner tube from the tyre.

Schrader valve

4. Change the inner tube

Switch the inner tube for an intact one.

Tubular tires and tubeless tires must be

changed according to the tires and rims’

manufacturer’s instructions.

5. Reassembling the tyre and inner tube

Please avoid allowing foreign bodies in-

side the tyre. Ensure that the inner tube

does not have any folds and is not

squashed.

Ensure that the rim tape covers all spoke

nipples and does not have any damage.

• Place one edge of the rim into the tyre.

• Push one side of the tyre completely into the

rim.

• Insert the valve through the valve hole in the

rim and put the inner tube into the tyre.

• Pull the second side of the tyre into the rim with

the balls of your hands.

• Ensure that the inner tube is correctly posi

tioned.

• Pump the inner tube up somewhat.

• Check that the tyre is properly in place and

runs true using the control ring on the side of

the tyre. Adjust the positioning of the tyre with

your hand if it does not quite run true.

• Pump the inner tube up to the recommended

tyre pressure.

Please take note of the running direction

of the tyre when installing it.

6. Reattaching the wheel

Reattach the wheel securely back in the frame or

fork with the corresponding quick release, bolted

connection or full oating axle mechanism.

If your bicycle has disc brakes, please

ensure that the brake discs are correctly

secured between the brake pads!

Read the gear manufacturer‘s instructions to cor

rectly and safely assemble and set up derailleur

gear systems, gear hubs and combined hub and

derailleur gear systems.

Tighten all screws to the recommended

torque. Failing to do so could cause the

screws to tear and components to come

apart.

Source: Shimano

techdocs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer RS serie - Panasonic in the language / languages: English, German, Dutch, French, Italian, Norwegian as an attachment in your email.

The manual is 11,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flyer RS serie - Panasonic

Flyer RS serie - Panasonic User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer RS serie - Panasonic Manual

Product: