803523

Flyer GOROC X 2022 Manual

294
Zoom out
Zoom in
Previous page
1/389
Next page
58
There is a risk that humidity or water
may penetrate the motor if the housing
of your battery is cracked. This may lead
to short circuits or electrical shocks. Im-
mediately stop using the battery in this
case and contact your FLYER specialist
retailer. Do not charge the battery.
If you notice any changes to your E-Bike, DO
NOT continue cycling. Do not retighten any loose
partswithoutrstcheckingthemandalwaysuse
a torque wrench. Take the FLYER to your FLYER
specialist retailer, describe the fall to them and
have the bicycle checked out.
13. Adjustingthe
biketotherider
Installingpedals
Always have your pedals installed or changed by
your FLYER specialist retailer, and feel free to ask
for advice on correct handling.
Pedals must be installed with a suitable spanner.
Please note that the two pedals are screwed on
indi󰀨erentdirectionsandmustbefastenedwith
high torque (See the separate “Technical Data”
operating instructions document.). Apply assem-
bly grease to both threads.
Pleasetake notethattherightpedal isdi󰀨erent
from the left. You can recognise which pedal be-
longs on which side from the screws which turn in
opposite directions. Usually, an “R” is embossed
on the right pedal and an “L” on the left. Screw the
right pedal clockwise and the left pedal anti-clock-
wise into the cranks.
The pedals must be fastened with a suit-
able spanner. Observe the correct fas-
tening torque when attaching the pedals.
Ensurethatthepedalsarettedstraight
(See the separate “Technical Data” op-
erating instructions document). If they
arettedatanangle,thereisadanger
that they will break and cause a fall.
(See the separate “Technical Data” op-
erating instructions document.)
For safety reasons, we strongly advise
not using pedals with clips or straps.
Ensure that you have read the manufac-
turer‘s instructions before using clipless
or step-in pedals. Practise clipping your
shoes in and out of the pedals’ locking
systembeforeyour rstrideina quiet,
safe place. Clipless pedals which do not
properly release are a safety hazard.
The release force of step-in pedals can
beadjusted.Pleasetestthisonyourrst
ride with a setting that releases easily.
Regularly clean the step-in pedals and
service them with a suitable lubricant.
The pedal surfaces may be very rough.
This improves the grip on the pedal.
Leather soles may be damaged by the
rough surface.
13.1 Operatingquick-release
fastenersandaxles
The wheels, seat post, seat, stem and handlebars
may be attached with quick-release fasteners,
quick-release axles or screw connections.
Only allow your FLYER specialist retailer
to perform work on quick-release fasten-
ers and quick-release axles. These are
components which are crucial for your
safety, so incorrect work and tools in this
area of the bicycle could lead to serious
falls.
Quick-releasefasteners
Quick-release fasteners are clamping brackets
which attach components like a screw, however
their clamping force stems from tightening the le-
ver without tools. The clamping force is activated
by opening and closing the lever.
The clamping force is adjusted by turning the
counter nut when the lever is open.
1. In order to open a quick-release fastener, to
adjust the seat post for example, open the
quick-release lever.
2. Now you can move and adjust the seat post.
The clip on the seat tube opening must not be
closed when the seat post is removed from a
FLYER with a carbon frame.
3. The quick-release fastener must be securely
closed before using the FLYER. Completely fold
down the quick-release lever for that purpose.
Fully engage any possible safety devices.
The quick-release fastener is only se-
curely closed when you need the power
of the ball of your hand to close the
clamping lever.
… 294 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer GOROC X 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer GOROC X 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 19.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info