803528
319
Zoom out
Zoom in
Previous page
1/412
Next page
71
EN
Adjust the brake lever to ensure that it
does not touch the handlebars when
pulled hard.
17.2 Disc brake
Disc brakes must be installed and ser-
viced by a FLYER specialist retailer.
Incorrectly set-up brakes can cause ac-
cidents and serious injuries.
A brake test is required before each ride and par-
ticularly after each brake adjustment.
Brakingbehaviourmayvary,inparticularafterex-
changing the brake pads.
Disc brakes require a bedding-in time to wear in
the discs and pads. The braking system only de-
livers its full performance after around 10 braking
cycles from 30 km/h. The braking force increases
during this time. Consider this during the entire
duration of the wearing-in period.
This wearing-in period is also required after re-
placing the brake pads or discs.
Pay attention to any unusual noise when braking,
as this could be a sign that the brake pads have
worn down to the wear limit. Check the thickness
of the brake pads once the brakes have cooled
down.
If necessary, have the brake pads replaced.
Please do not touch the brake disc while
itisrotating.Youcansu󰀨erseriousinju-
riesifyourngeriscaughtinthegapsof
a rotating brake disc.
The brake calliper and disc may get hot
during braking.
Youcouldsu󰀨erburnsifyoutouchthis
part during or directly after braking.
Have the brake disc replaced if it is worn out or
bent. This replacement procedure must be car-
ried out by a FLYER specialist retailer.
Air bubbles in disc brakes
You can avoid this problem by applying
the brake lever before transport and then
xing it in this position using a strap.
This prevents any air from entering the
hydraulic system. Please note that the
brake lever may not be pulled when the
wheel has been removed. Place a spac-
er between the brake blocks if you need
to remove the wheel.
17.3 Hydraulicrimbrakes
As the brake pads wear, the path of the hand lever
increases. When this happens, you may have to
adjust the rim brakes. As is the case for most bike
models, this can be done by adjusting a screw
or a setting wheel on the brake lever. Ask your
FLYER specialist retailer for details.
Quelle: Shimano
®
techdocs
New brake pads
New rim (with points
to indicate wear)
Worn out brake pads
Worn rims
319


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info