Manual Flyer Crossocver - Fit 2022 (page 314 of 412) (English, German, Dutch, French, Italian)

803528

314

Zoom out

Zoom in

1/412

factory are pretreated with sealant for tubeless

use. Once you have let your FLYER specialist

retailer perform the simple installation, you can

enjoy improved traction o󰀨 road and increased

puncture protection.

Tubeless tyres must only be tted and

removed from the rim without tools, as

using them could cause leaks.

Ifthesealantisnotsu󰀩cienttopreventa

defect, a normal tube can be used once

the valve has been removed.

14.3 Dealingwithaattyre

Correct and safe repair of a at tyre requires

specialised E-Bike knowledge and special tools.

Havetechnicaldefectsandattyresexclusively

repaired by your FLYER specialist retailer.

Repairing a tyre puncture involves hav-

ing to adjust safety-relevant compo-

nents. Incorrect mounting of the wheels

and brakes can lead to severe falls and

injuries. We strongly advise you not to

repair a tyre puncture alone. Ask your

FLYER specialist retailer to x the tyre

puncture for you.

Get thorough instructions from your

FLYER specialist dealer and practise

changing the wheels and tyres under

their supervision if you plan to repair

yourownattyres.Thesystemmustbe

switchedo󰀨andthebatterymustbere-

moved before changing a tyre or wheel.

You need the following equipment to repair a tyre

puncture:

• Plastic tyre lever

• Patches

• Rubber cement

• Sandpaper

• Open-ended spanner or wrench

(for wheels without quick-release fasteners)

• Air pump

• Spare tube

If your bike is equipped with hydraulic rim

brakes, proceed to remove the brakes as follows:

• If you have quick releases for the brakes, you

can remove a brake unit according to the man-

ufacturer’s instructions.

• If you do not have a brake quick-release fas-

tener,deatealloftheairoutofthetyre.

If your FLYER is equipped with a disc brake, you

can remove the wheel without further preparation.

Pleasenote:whenttingthewheel,thediscmust

be slotted between the brake linings of the brake

calliper and ultimately be centred without contact.

In the case of back pedal brakes, the screws on

the brake arm of the chain stay have to be opened.

2. Removing the wheel

• If your bicycle has quick-release fasteners or

axles,openthem.

• Ifyourbicyclehashexagonalbolts,thenloos-

entheminanti-clockwisedirectionwithatting

ringspannerorbox-endwrench.

Removing the wheel

Front wheel

If your bicycle has quick-re-

lease fasteners or axles,

open them.

Ifyourbicyclehashexago-

nal bolts, then loosen them

in anti-clockwise direction

withattingringspannerorbox-endwrench.

You can then remove the front wheel according to

the steps listed above.

Rear wheel

If your bicycle uses a derailleur gear system,

change gear to the smallest sprocket. In this posi-

tion, the rear derailleur poses the least hindrance

in removing the wheel.

Ifyourbicyclehasquick-releasefastenersorax-

les, open them.

Ifyourbicyclehashexagonalbolts,thenloosen

theminanti-clockwisedirectionwithattingring

spannerorbox-endwrench.

Pull the rear derailleur backwards a little.

Lift the bicycle slightly.

Lightly strike the wheel from above with the palm

of the hand. Take the wheel out of the frame.

If your bicycle has a gear hub, please consult the

instructions supplied by your manufacturer for re-

moving the wheel.

Removingthetyreandinnertube

• Unscrew the valve cap, the fastening nut and

possibly the cap nut from the valve.

• Release all of the remaining air from the inner

tube.

Quelle: Shimano

techdocs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Crossocver - Fit 2022 Manual

Product: