Manual Flyer Crossocver - Fit 2022 (page 312 of 412) (English, German, Dutch, French, Italian)

803528

312

Zoom out

Zoom in

1/412

Inordertoadjusttheexibilityofyoursuspension

element,youmustcongurethesuspensionsti󰀨-

ness/air pressure. If you change the air pressure,

the overall sti󰀨ness of the suspension element

also changes. The more the suspension element

is pumped up, the harder it becomes. In order to

achieve an optimum balance between the manu-

facturer’srecommendedexibilityandthedesired

sti󰀨ness,followtheseinstructionswhenadjusting

the suspension element:

Adjustingtheexibility

Ensure that the pressure stages on the fork and

rear shock are set to the “open” position.

Fill the air chamber, using the table as a guide.

To let air out of the air chamber, remove the air

cap and press the valve pin down or press the air

release button on the suspension pump.

The air pressure in the rear suspension

elementmustnotexceedthemaximum

valuespeciedintherelevantoperating

instructions.

There are guidelines on air pressure for certain

forks.

1. Di󰀨erent air pressures or settings

may be necessary. Example: Di󰀨er-

ent driving styles and uses require a

di󰀨erent air pressure and exibility.

Therefore, this adjustment procedure

is just a starting point.

2. The valve cap must always be on the

suspension element while you are

riding so that dirt cannot get into the

valve.

Push the O-ring for the suspension path indicator

against the air chamber/the lower fork dip pipe.

Carefully position yourself centrally on the bike,

thengeto󰀨again.

Important:ifyouexerttoomuchforceonthebike

whilegettingonando󰀨,youwillobtainimprecise

measurements.

Check the position of the O-ring on the housing

of the suspension element. Check whether the

exibilityisaround25%.

If the exibility is lower than the value recom-

mended by the bicycle manufacturer, i.e. the

suspension element is compressed by less than

25%, reduce the air pressure.

If the exibility is higher than the value recom-

mended by the bicycle manufacturer, increase the

air pressure. The air pressure in the rear damper

mustnotexceedthemaximumvaluespeciedin

the relevant operating instructions.

Replace the air cap.

Adjustable rebound

The rebound determines the speed at which the

suspensionelementreturnstoitsfullyextended

position after compressing. The suspension ele-

ments have a red rebound dial that you can use

to adjust the rebound. The suspension element

extendsfastestwhentheadjustingknobisturned

anti-clockwiseuptothestop.Itextendsslowest

when the knob is turned to the stop in the clock-

wise direction.

Setting the rebound

You can determine the starting point for setting

the rebound at the curb.

Theexibilityofthesuspensionmustbe

adjusted before you can adjust the re-

bound of the damping.

Perform the test in a safe area with no

tra󰀩c.

Turn the rebound dial anti-clockwise until it reach-

es the stop.

Ridethebikeo󰀨thepavementwhileyouaresit-

ting on the seat.

Count the number of times the suspension ele-

ment rebounds.

It should be adjusted so that it rebounds just once.

If it rebounds several times, turn the rebound dial

clockwiseoneclick.Rideo󰀨thepavementagain

and count how many times the suspension ele-

ment rebounds. Repeat this step until the suspen-

sion element rebounds only once.

Note the number of clicks (or turns) through which

you moved the dial from the anti-clockwise stop.

This is your rebound setting.

If the rebound is set correctly for a suspension

fork,the front wheelshould notlift o󰀨when the

fork is compressed when stationary and abruptly

released.Ifthefrontwheelliftso󰀨thegrounddur-

ing this test, turn the rebound through one further

click and repeat the test.

The suspension changes the distance

between the pedal and the ground while

riding. When riding over bumps, always

keep the crank arms in the horizontal po-

sition. When riding around bends, keep

the crank arms in the vertical position

with your foot down on the outside of the

bend in order to prevent the pedals from

touching the ground.

Suspension and chassis components

are vital parts of your FLYER. Service

and check your FLYER suspension at

regular intervals. Have your FLYER in-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flyer Crossocver - Fit 2022 Manual

Product: