803528
304
Zoom out
Zoom in
Previous page
1/412
Next page
56
Ensure that you have read the manufac-
turer‘s instructions before using clipless
or step-in pedals. Practise clipping your
shoes in and out of the pedals’ locking
systembeforeyour rstrideina quiet,
safe place. Clipless pedals which do not
properly release are a safety hazard.
The release force of step-in pedals can
beadjusted.Pleasetestthisonyourrst
ride with a setting that releases easily.
Regularly clean the step-in pedals and
service them with a suitable lubricant.
The pedal surfaces may be very rough.
This improves the grip on the pedal.
Leather soles may be damaged by the
rough surface.
13.1 Operating quick-release
fastenersandaxles
The wheels, seat post, seat, stem and handlebars
may be attached with quick-release fasteners,
quick-releaseaxlesorscrewconnections.
Only allow your FLYER specialist retailer
to perform work on quick-release fasten-
ersandquick-releaseaxles.Theseare
components which are crucial for your
safety, so incorrect work and tools in this
area of the bicycle could lead to serious
falls.
Quick-releasefasteners
Quick-release fasteners are clamping brackets
which attach components like a screw, however
their clamping force stems from tightening the le-
ver without tools. The clamping force is activated
by opening and closing the lever.
The clamping force is adjusted by turning the
counter nut when the lever is open.
1. In order to open a quick-release fastener, to
adjust the seat post for example, open the
quick-release lever.
2. Now you can move and adjust the seat post.
3. The quick-release fastener must be securely
closed before using the FLYER. Completely
fold down the quick-release lever for that pur-
pose. Fully engage any possible safety devic-
es.
The quick-release fastener is only se-
curely closed when you need the power
of the ball of your hand to close the
clamping lever.
The adjustment nut of the quick-release fastener
must be tightened when the tightening force is not
high enough, e.g. when the seat does not stay
in position. To do this, the clamping lever must
be open.
The quick-release fastener cannot be closed
when the tightening force is too high. Open the
clamping lever in this case and slightly loosen the
adjustment nut.
All quick-release fasteners must be
rmlyclosedbeforeyouseto󰀨.
Check all quick-release fasteners for
correct attachment if the vehicle was
parked for a short time without super-
vision and before every ride.
A closed quick-release fastener must
be folded close to the frame, fork or
seat post.
Lock down wheels or other parts of your
vehicle that are attached with quick-re-
lease fasteners when you park your bi-
cycle.
Tightening the adjusting nutLoosening the adjusting nut
304


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info