803528

Flyer Crossocver - Fit 2022 Manual

303
Zoom out
Zoom in
Previous page
1/412
Next page
55
EN
Do not forget to take a high-quality bike
lock with you on the ride so you can park
your FLYER and lock it to an immovable
object. Separately lock the components
that are fastened with quick-release fas-
teners(e.g. the front wheel) as required.
This will prevent theft of these add-on
parts.
12. Afterafall
Have the vehicle and all components checked
for changes, damage, rm attachment and cor-
rect function by a FLYER specialist retailer. This
may, in particular, include dents and cracks in the
frame and fork, bent components and parts such
as the handlebars or a shifted or turned seat.
Inspection by a FLYER specialist retailer must
cover the following main points:
• Carefully check the frame and fork. Deforma-
tions can usually be detected when looking at
surfacesfromdi󰀨erentangles.
• Are the seat, seat post, stem and handlebars
still in their correct positions? If this is not the
case, do NOT move the components back
from their changed position before loosening
the relevant screw connection. It is essential
to adhere to the prescribed fastening torque.
Values and information are provided in the se-
parate “Technical Data” operating instructions
document.
• Check whether both wheels are correctly and
rmlyattachedtotheframeandfork,thatboth
thefrontandrearwheelsrotatefreely.Experts
can see from the distance between the frame
or fork and the wheel whether the wheel turns
without snagging.
• Check that both brakes are operating fully.
• Do not set o󰀨 again without having checked
that the chain is sitting securely on both the
front chain wheel and rear sprockets. It must
beengaged fullywith thecogs. Ifyou seto󰀨
andthechainjumpso󰀨acogyoumayfall,at
the risk of very severe injury.
• Check whether the display of the FLYER
E-Bike shows a fault message or a warning.
Do not drive your FLYER when a warning is
displayed. Contact your FLYER specialist re-
tailer immediately.
• Check that the display and the battery are un-
damaged. Do not ride your FLYER if there are
any noticeable changes (cracks, scratches,
etc.).Haveallpartsandfunctionscheckedrst
by your FLYER specialist retailer.
There is a risk that humidity or water
may penetrate the motor if the housing
of your battery is cracked. This may lead
to short circuits or electrical shocks. Im-
mediately stop using the battery in this
case and contact your FLYER specialist
retailer. Do not charge the battery.
If you notice any changes to your E-Bike, DO
NOT continue cycling. Do not retighten any loose
partswithoutrstcheckingthemandalwaysuse
a torque wrench. Take the FLYER to your FLYER
specialist retailer, describe the fall to them and
have the bicycle checked out.
13. Adjusting the
bike to the rider
Installing pedals
Always have your pedals installed or changed by
your FLYER specialist retailer, and feel free to ask
for advice on correct handling.
Pedals must be installed with a suitable spanner.
Please note that the two pedals are screwed on
indi󰀨erentdirectionsandmustbefastenedwith
high torque (See the separate “Technical Data”
operating instructions document.). Apply assem-
bly grease to both threads.
Pleasetakenotethattherightpedal isdi󰀨erent
from the left. You can recognise which pedal be-
longs on which side from the screws which turn in
opposite directions. Usually, an “R” is embossed
on the right pedal and an “L” on the left. Screw the
right pedal clockwise and the left pedal anti-clock-
wise into the cranks.
The pedals must be fastened with a suit-
able spanner. Observe the correct fas-
tening torque when attaching the pedals.
Ensurethatthepedalsarettedstraight
(See the separate “Technical Data” op-
erating instructions document). If they
arettedatanangle,thereisadanger
that they will break and cause a fall.
(See the separate “Technical Data” op-
erating instructions document.)
For safety reasons, we strongly advise
not using pedals with clips or straps.
… 303 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flyer Crossocver - Fit 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flyer Crossocver - Fit 2022 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 34.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info