775815
17
Zoom out
Zoom in
Previous page
1/21
Next page
Maintenance
13
Battery Life and Replacement
The toner and probe batteries last for about 20 hours of
typical use.
Figure 5 shows how to replace the battery in the toner and
probe.
Note
The position of the probe’s rotary switch when the
battery is replaced enables or disables shield
validation for cable map tests. See “Validating the
Cable’s Shield” on page 10.
W
Warning
X
To avoid possible electric shock or personal injury:
Turn off the toner or probe and disconnect all test
leads before replacing the battery.
Use only a 9 V battery, properly installed in the
case, to power the toner and probe.
W
Caution
To avoid unreliable test results, replace the
battery as soon as the low battery indication
appears. See “Battery Status” on page 4.
ASH10.EPS
Figure 5. Replacing the Battery
See text regarding
probe's switch position
during battery replacement.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks IntelliTone Pro 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks IntelliTone Pro 200 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke networks IntelliTone Pro 200

Fluke networks IntelliTone Pro 200 Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info