775815
8
Zoom out
Zoom in
Previous page
1/21
Next page
IntelliTone Pro 200 LAN
Users Manual
4
WSafety Information
W
Warning
X
To prevent possible fire, electric shock, or
personal injury:
Never use the toner, probe, or test leads if they
are damaged. Inspect the cases and test leads for
damage before use.
Never open the case except to change the battery;
no user-serviceable parts are inside.
Turn off the toner or probe and disconnect all test
leads before replacing the battery.
Use only a 9V battery, properly installed in the
case, to power the toner and probe.
If this equipment is used in a manner not specified
by the manufacturer, the protection provided by
the equipment may be impaired.
W
Caution
Avoid touching the probe tip to patch panel
connections and using the tip to dig into cable
bundles. Doing so regularly may damage the
probe tip over time.
To avoid unreliable test results, replace the
battery as soon as the low battery indication
appears.
Battery Status
LEDs on the toner and probe light for 1 second at power
on to indicate the battery status:
Green: Battery is good.
Yellow: Battery is marginal.
Red: Battery is low.
See “Battery Life and Replacement” on page 16 for more
information on the battery.
Auto Power Down
The toner turns off automatically after approximately 2 ½
hours of inactivity. The probe turns off automatically after
1 hour of inactivity.
Toner battery status
LED Probe battery status
LED
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks IntelliTone Pro 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks IntelliTone Pro 200 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke networks IntelliTone Pro 200

Fluke networks IntelliTone Pro 200 Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info