Manual Fluke networks DSX CableAnalyzer (page 40 of 90) (English)

624052

Zoom out

Zoom in

1/90

DSX CableAnalyzer

Users Manual

Table 2. Settings for Twisted Pair Tests

Setting Description

Module Select DSX-5000 CableAnalyzer.

Cable Type Select a cable type that is correct for the type you will

test. To see a different group of cable types, tap MORE,

then tap a group. To make a custom cable type, tap

Custom in the Cable Groups list.

NVP Nominal velocity of propagation. The tester uses the NVP

and the propagation delay to calculate the length of the

cable.

The default value is defined by the selected cable type

and is the typical NVP for that cable type. To enter a

different value, tap the NVP panel, then tap

on the NVP screen to increase or decrease the value.

To find the actual value for a cable, connect a known

length of the cable to the tester, tap MEASURE on the

NVP screen, then change the NVP until the measured

length matches the known length. Use a cable at least

30 m (100 ft) long.

When you increase the NVP value, the calculated length

increases.

Shield Test This setting shows only when you select a shielded cable

type. When you set Shield Test to On, the wire map test

includes a test for shield continuity.

Test Limit Select the correct test limit for the job. To see a different

group of limits, tap MORE, then tap the name of a

group.

riešenia na presné meranie

http://www.elso.sk

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks DSX CableAnalyzer in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke networks DSX CableAnalyzer

Fluke networks DSX CableAnalyzer Quick start guide - English - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke networks DSX CableAnalyzer Manual

Product: