Manual Fluke 190-102-III (page 54 of 98) (English)

775826

Zoom out

Zoom in

1/98

190 Series III

Users Manual

2. Use the cursor and E to select a Trigger Filter or set it Off.

3. Use the cursor and E to set NCycle to On.

Observe that the key labels at the bottom of the screen have been changed to allow further

selection of specific N-Cycle trigger settings.

4. Use g f to set the number of cycles N.

5. Use h i to adjust the trigger level.

Waveforms with N-Cycle trigger (N=7) show on the display. See Figure 28.

Figure 28. Waveforms with N-Cycle Trigger

External Waveform Triggers (190-xx2)

Use external triggering when you want to display waveforms on inputs A and B while triggering

on a third signal.

You can choose external triggering with automatic triggering or with edge triggering:

1. Supply a signal to the red and black 4-mm banana jack inputs.

In this example you continue from the Trigger on Edges example.

To choose the external signal as trigger source:

2. Press T to show the TRIGGER (On Edges) key labels.

3. Press 1 to select Ext (external) edge trigger.

Observe that the key labels at the bottom of the screen have been adapted to allow selection

of two different external trigger levels: 0.12 V and 1.2 V.

4. Press 3 to select 1.2V under the Ext LEVEL label.

From this point the trigger level is fixed and is compatible with logic signals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 190-102-III in the language / languages: English as an attachment in your email.

The manual is 9.23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke 190-102-III Manual

Product: