775826

Fluke 190-102-III Manual

40
Zoom out
Zoom in
Previous page
1/98
Next page
190 Series III
Users Manual
34
Recorded Data Display
In Normal view, the samples that roll off the screen are stored in deep memory. When the
memory is full, recording continues by shifting the data in memory and deleting the first samples
out of memory.
In View All mode, the complete memory contents are displayed on the screen. Press 3 to
toggle between VIEW ALL (overview of all recorded samples) and NORMAL view.
You can analyze the recorded waveforms using the Cursors and Zoom functions. See Replay,
Zoom and Cursors.
Scope Record in Single Sweep Mode
Use the recorder Single Sweep function to automatically stop recording when the deep memory
is full.
To s e t u p:
1. Start the record mode. See Starting a Scope Record Function.
2. Press 1 to stop recording and unlock the OPTIONS softkey.
3. Press 2 to open the RECORDER OPTIONS menu.
4. Use the cursor and E to highlight the Mode field, select Single Sweep, and accept the
recorder options.
5. Press 1 to start recording.
Triggering to Start or Stop Scope Record
To record an electrical event that causes a fault, it might be useful to start or stop recording on a
trigger signal: Start on trigger to start recording; recording stops when the deep memory is full
Stop on trigger to stop recording. Stop when untriggered to continue recording as long as a next
trigger comes within 1 division in view all mode.
• For the models 190-xx4 the signal on the BNC input that has been selected as trigger source
must cause the trigger.
• For the models 190-xx2 the signal applied to the banana jack inputs (EXT TRIGGER (in)).
signal must cause the trigger. The trigger source is automatically set to Ext. (external).
To s e t u p:
1. Start the record mode. See Starting a Scope Record Function.
2. Apply the signal to be recorded to the BNC input(s).
3. Press 1 to stop recording and unlock the OPTIONS softkey.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 190-102-III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 190-102-III in the language / languages: English as an attachment in your email.

The manual is 9.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info