775836

Fluke 1777 Manual

40
Zoom out
Zoom in
Previous page
1/62
Next page
1773/1775/1777
Users Manual
34
Description. Type in useful information about the measurement session for the report. Include
information about the measurement location, who performed the installation, and the type of
equipment being monitored.
Duration, Start Time. 10 minutes, 1 hour, 1 day, 1 week, and 30 days are the preset durations
available for logging sessions.
There are also special settings:
No End: a session that never ends, when the memory is full, the memory is overwritten.
The length of the session depends on the selected average period and the detail of the
harmonics logging.
Maximum: a session that fills the memory and then stops.
Custom: provides the flexibility to select the length of the session in terms of a chosen
number of days or hours.
For each of the duration selections (except No End) select a Start Time. This can be
immediately when the session starts or a future date (day, month, and year), hours, and
minutes.
After setting the Start Time, select Done. Select Done once more to exit the Duration, Start
Time screen.
An overview of the Session Settings shows on the display. The next step is a final check to
ensure the wiring to the Analyzer is correctly connected. When everything is correct, start the
session. The Analyzer now shows the measurements in process. For a future start time, a
count down timer shows when the first readings will be available.
Trend Interval. The trend interval selection provides for the resolution of the trend plots
recorded by the Analyzer. This selection impacts the amount of memory used like duration.
Select Done to exit Trend Interval.
Harmonics. The Harmonics selection allows the addition of interharmonics to the recording.
For IEEE 519 purposes, 3-second harmonics can be selected. When evaluating the impacts of
higher-order harmonics introduced into the power system from energy conversion systems
like inverters, check the Supra-harmonics box to measure harmonics up to 30 kHz. Select
Done when finished to return to the main Session Settings screen.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 1777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 1777 in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info