Manual Florabest FKS 2200 E3 - IAN 275658 (page 11 of 112) (English, German, Dutch, Danish)

783798

Zoom out

Zoom in

1/112

IEGB

eld which, under certain circumstances,

may impair the functionality of active

or passive medical implants. To reduce

the risk of serious or lethal injuries, we

recommend that persons with medical

implants consult their doctor and the

manufacturer of their medical implant

before operating the machine.

Power tool use and care

• Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

• Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust-

ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have

the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• For sawing work on a slope, always

stand above the tree trunk. To keep con-

trol at the moment of “sawing through”,

reduce the contact pressure at the end

of the cut without loosening the rm grip

on the chainsaw handles. Ensure that the

saw chain does not come into contact

with the ground. After completing the

cut, wait for the chainsaw to come to a

standstill before removing the chainsaw.

Always switch off the chainsaw motor

before moving from one tree to another.

• Dirt, stones, loose bark, nails, staples

and wire must be removed from the tree.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

• Follow the maintenance, control and

service instructions in this manual care-

fully.

Damaged safety equipment and parts

must be repaired or replaced profes-

sionally by our service centre, unless

otherwise indicated in the operating

instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FKS 2200 E3 - IAN 275658 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 1.67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FKS 2200 E3 - IAN 275658 Manual

Product: