539960
9
Zoom out
Zoom in
Previous page
1/64
Next page
9
IE
GB
Check the proper status of the
electrical plug socket and make
sure that the plug socket is suf-
cientlyfused(atleast10A).In-
sert the pump plug into the plug
socket and the pump is ready for
operation.
Make sure that moisture or water
never come in contact with the
mains connection.
There is a risk of electrocution.
The appliance is not suitable for
direct connection to the drinking
water supply system.
Starting the unit
Control the suction hose. The end of
the suction hose must be placed in wa-
ter.
Control the pressure hose. The end of
the pressure hose must be in outlet po-
sition.
Switch on the garden pump with the
ON / OFF switch (
A
5).
Overload protection: In the
event of overload the equipment
automatically switches off. To re-
start, allow the equipment to cool
then switch it back on.
Maintenance
Instructions
Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Pull out the power plug before every
maintenance operation. There is a risk
of electrocution or of injury from mov-
ing parts.
Never direct the water jet
against the appliance, nor
clean the appliance under
owing water. This could
give rise to the danger of
electric shock and damage
the appliance!
General cleaning instructions
A reduction in pump feed output may be
indicative of a blockage. In case the unit
clogs up, remove the suction and pressure
hoses. Flush water through the threaded
hole on the pump in order to remove the
foreign body.
Always keep the appliance clean. Do
not use any detergents or solvents.
Keep clean the engine rips and motor
housing. Use a damp cloth or a brush.
Always keep the ventilation slots
clean and free.
Only clean the appliance with a soft
brush or a slightly moist cloth.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.
Storage
Keep the equipment clean, dry and out
of the reach of children.
With a rinse of water, remove uff and
brous particles which are possibly
present in the pump casing
9


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fgps-1100-b2

Reset search

  • I have a FGPS 1100 C4 Florabest pump. It runs fine after filling the primer end but cuts off after about 30 minutes of running a sprinkler. I have to then refill the primer reservoir and wait about 30 minutes before the pump will restart. I have to repeat the procedure about every 30 minutes. What's the problem? Submitted on 7-7-2020 at 20:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FGPS 1100 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FGPS 1100 B2 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info